Steyr CVT 6225
Built: 2009 · Series: CVT-Baureihe
More machines from model year 2009
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Steyr CVT: stepless transmission for large-scale farming, from the 6230 to the CVT 6225, 88.3 to 195 kW (120 to 265 hp), six-cylinder Sisu Diesel engines with water cooling
Since the 1996 takeover by what became the CNH group, Steyr has remained an independent brand based in St. Valentin. The CVT series represents the stepless large tractors with which Steyr has competed in the upper power segment ever since.
Read on 4 more paragraphs
The register lists 7 live models, from the 6230 to the CVT 6225, built roughly between 2000 and 2009. Output ranges from 88.3 to 195 kW, or 120 to 265 hp, weight from 6,270 to 8,500 kg, displacement from 6,597 to 6,728 cm3, with six-cylinder engines throughout.
The namesake stepless CVT transmission allows travel speed to be matched to load and ground conditions without delay, avoiding the drawbar-pull interruption of classic powershift gearboxes.
The CVT series thus sits clearly above the classic 8000-series tradition, aimed at large operations with high demands on ride comfort and efficiency.
The Sisu Diesel six-cylinder fitted here now trades as AGCO Power, after the Finnish engine maker was fully absorbed into the AGCO group; spares for this engine type accordingly run through AGCO's parts logistics. When buying a used CVT tractor, besides the engine, the condition of the hydrostatic-mechanical power-split transmission matters most: gearbox oil-change intervals, the transmission electronics' fault memory and the function of the stepless adjustment should be checked on a test drive across the full speed range before buying.
Sources: SpecCodex register, model data: Steyr CVT-Baureihe, Steyr
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 224 hp (165 kW)correct |
| Rated speed | 2,200 rpmcorrect |
| Torque | 950 Nmcorrect |
| Cylinders | 6correct |
| Displacement | 6,728 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 5,017 mmcorrect |
|---|---|
| Width | 2,645 mmcorrect |
| Height | 3,090 mmcorrect |
| Wheelbase | 2,884 mmcorrect |
| Unladen weight | 7,200 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | stufenloses Getriebecorrect |
| Front tyres | 600/65 R28correct |
| Rear tyres | 650/65 R42correct |
| Top speed | 50 km/hcorrect |
Working data
| Fuel tank capacity | 412 lcorrect |
|---|
Where this model stands
Power-to-weight ratio: 22.9 kW/t (165 kW / 7.2 t)
Power class: Heavy (> 180 hp)
Stronger than 93% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Steyr CVT 6225 have?
The Steyr CVT 6225 delivers 224 hp.
How much does the Steyr CVT 6225 weigh?
The unladen weight is 7,200 kg.
What engine does the Steyr CVT 6225 have?
6 cylinders, 6,728 cm³ displacement, Diesel.
How fast does the Steyr CVT 6225 go?
Top speed is 50 km/h.
What are the dimensions of the Steyr CVT 6225?
5,017 mm × 2,645 mm × 3,090 mm.
When was the Steyr CVT 6225 built?
Production years: 2009.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 19 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.