Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Steyr › 182 a

Steyr 182 a

Built: 1959–1963 · Series: 13er-Baureihe

More machines from model year 1959

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the 182 a, Steyr offers a model from the 13er series. Production: 1959–1963. The engine delivers 32 hp (23.6 kW), has 2 cylinders, with a displacement of 2,661 cm³. Rated speed is 1,700 rpm. The machine is 2,840 mm long, 1,670 mm wide and 1,610 mm high. The unladen weight is 1,920 kg. The wheelbase measures 1,842 mm. Ground clearance is 350 mm. Top speed is 30 km/h. The tank holds 48 litres. Transmission: 8V/4R. The engine is water-cooled. Tyres: front 6.00-16 ASF, rear 11-28 AS. The fuel is diesel. The bore measures 110 mm. The stroke is 140 mm. The compression ratio is 21:1. Construction: unit construction (no separate frame). The gearbox offers 8 forward gears. There are also 4 reverse gears. Injection pressure is 135 bar. Around 303 + 2155 units were built. The 13er-Baureihe series covers 9 models. Rated output within it ranges from 16.5 to 68 hp; the 182 a sits in the lower part of that range with 32 hp. Its immediate neighbours are the 180 a below it with 30 hp and the 185 above it with 45 hp. Unladen weight within it ranges from 1,250 to 3,150 kg; here the 182 a sits in the lower part of that range with 1,920 kg. 137 Steyr models across 20 series are on record.

Steyr 180/280: the early post-war tractors from St. Valentin, from the 180 a to the Steyr 84, 12.1 to 50 kW (16.5 to 68 hp), one- to four-cylinder engines with water cooling

After the Second World War, Steyr achieved its breakthrough in tractor building with simple, rugged models from St. Valentin, bundled in this series — the foundation of Steyr's later reputation as a maker of low-maintenance tractors.

Read on 4 more paragraphs

The register lists 9 live models, from the 180 a to the Steyr 84, built between 1952 and 1968. Output ranges from 12.1 to 50 kW, or 16.5 to 68 hp, weight from 1,250 to 3,150 kg, displacement from 1,330 to 5,322 cm3, across one- to four-cylinder engines.

With simple one- and two-cylinder engines at the lower end and stronger four-cylinder models at the top, this early series already covered a remarkable power spectrum for the 1950s.

These tractors were central to Austria's agricultural reconstruction and laid the foundation for Steyr's market position, which held until the CNH takeover in 1996.

The smallest single-cylinder models in this early series had no electric starter and were hand-cranked, typical of the simple, low-maintenance design of the 1950s; a PTO at the 540 rpm speed still standard today was already fitted. When viewing surviving examples, it is worth checking the starting crank or starter, the ignition magneto or glow-plug system, and the condition of the still-exposed drivetrain parts, since these machines have none of today's safety features such as a roll-over protective structure.

Sources: SpecCodex register, model data: Steyr 13er-Baureihe, Steyr

Technical data

Engine

Fueldieselcorrect
Power32 hp (23.6 kW)correct
Rated speed1,700 rpmcorrect
Cylinders2correct
Displacement2,661 cm³correct
Bore110 mmcorrect
Stroke140 mmcorrect
Compression ratio21correct
Injection pressure135 barcorrect
Coolingwater-cooledcorrect

Dimensions and weights

Length2,840 mmcorrect
Width1,670 mmcorrect
Height1,610 mmcorrect
Wheelbase1,842 mmcorrect
Ground clearance350 mmcorrect
Unladen weight1,920 kgcorrect

Drivetrain and chassis

Driverear-wheel drivecorrect
Gearbox8V/4Rcorrect
Forward gears8correct
Reverse gears4correct
Front tyres6.00-16 ASFcorrect
Rear tyres11-28 AScorrect
Top speed30 km/hcorrect

Working data

Fuel tank capacity48 lcorrect

Origin and approval

Constructionunit construction (no separate frame)correct
Units built303 + 2155correct

Where this model stands

Power-to-weight ratio: 12.3 kW/t (24 kW / 1.9 t)

Power class: Compact (< 40 hp)

Stronger than 19% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Steyr 182 a have?

The Steyr 182 a delivers 32 hp.

How much does the Steyr 182 a weigh?

The unladen weight is 1,920 kg.

What engine does the Steyr 182 a have?

2 cylinders, 2,661 cm³ displacement, Diesel.

How fast does the Steyr 182 a go?

Top speed is 30 km/h.

What are the dimensions of the Steyr 182 a?

2,840 mm × 1,670 mm × 1,610 mm.

When was the Steyr 182 a built?

Production years: 1959–1963.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 28 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare