Stewart & Stevenson M1088
Built: 1995 · Series: Other models
More machines from model year 1995
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Stewart & Stevenson – other models: the FMTV military trucks from Houston, LMTV, M1078, M1081A1, M1088 and M1093, six-cylinders, gross weight 12 to 20 tonnes
Stewart & Stevenson of Houston, Texas, developed the Family of Medium Tactical Vehicles (FMTV) for the US Army in the 1990s, from which the LMTV (Light Medium Tactical Vehicle) range emerged. This page gathers the versions outside the named ranges, including the base LMTV, the M1078 cargo truck and the variants M1081A1, M1088 (a tractor unit) and M1093, all built on the same all-wheel-drive chassis.
Read on 3 more paragraphs
The register lists here 5 versions with six-cylinders of 6,600 to 7,200 cm³, unladen weights from 7,985 to 9,522 kg, gross weights from 11,990 to 20,252 kg, lengths from 6,500 to 8,250 mm and widths from 2,440 to 2,500 mm.
The FMTV family replaced older US-forces military-truck ranges from the 1990s and continues to be built in large numbers, under changing ownership since the takeover of Stewart & Stevenson's military business by Armor Holdings and later BAE Systems; vehicles retired from service regularly reach the civilian used market, both within the United States and abroad through surplus programmes.
On these tactical trucks, operating hours, the condition of four-wheel drive and transfer case, corrosion of frame and load bed, and whether the vehicle comes from military or civilian disposal, which determines parts availability, count; parts run through specialist military-vehicle suppliers and partly through civilian FMTV refurbishers, whose stock varies by variant and generation.
Sources: SpecCodex register, model data: Stewart & Stevenson (weitere Modelle)
Technical data
Engine
| Cylinders | 6correct |
|---|---|
| Displacement | 7,200 cm³correct |
Dimensions and weights
| Length | 8,250 mmcorrect |
|---|---|
| Width | 2,450 mmcorrect |
| Wheelbase | 4,800 mmcorrect |
| Unladen weight | 9,225 kgcorrect |
| Gross vehicle weight | 20,252 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 90 km/hcorrect |
Frequently asked questions
How much does the Stewart & Stevenson M1088 weigh?
The unladen weight is 9,225 kg.
What is the gross vehicle weight of the Stewart & Stevenson M1088?
20,252 kg.
What engine does the Stewart & Stevenson M1088 have?
6 cylinders, 7,200 cm³ displacement.
How fast does the Stewart & Stevenson M1088 go?
Top speed is 90 km/h.
What are the dimensions of the Stewart & Stevenson M1088?
8,250 mm × 2,450 mm.
When was the Stewart & Stevenson M1088 built?
Production years: 1995.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
