Stewart TK 46 H
Built: 1936 · Series: Other models
More machines from model year 1936
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Stewart TK 46 H: light lorry in EU class N2 with a six-cylinder engine, four wheels, a gross vehicle weight of 4,763 kg and a kerb weight of 2,640 kg on a wheelbase of 3,830 mm, built in 1936
Stewart was an American manufacturer of load-carrying vehicles active in the first half of the 20th century. The TK 46 H recorded here dates from 1936, placing it in the pre-war generation of light American load carriers.
Read on 3 more paragraphs
The TK 46 H is driven by a six-cylinder engine and stands on four wheels, with a wheelbase of 3,830 mm and a width of 2,050 mm. The vehicle weighs 2,640 kg empty, with a gross vehicle weight of 4,763 kg.
At a gross vehicle weight of 4,763 kg the TK 46 H falls into EU class N2 between 3.5 and 12 t. Kerb weight and gross weight differ by 2,123 kg of payload margin, almost the entire kerb weight again as cargo, which was common for light load carriers of that era and points to use with variable cargo rather than permanently mounted equipment. The six-cylinder engine on a comparatively short wheelbase of 3,830 mm suits a nimble chassis for urban and regional traffic rather than long-haul work.
Buying such an old chassis second-hand, checking the frame for corrosion and the riveted joints comes first, since welded construction was not yet fully established at the time. The six-cylinder engine calls for a check of compression, the distributor and the carburettor, and the mechanical brakes should be checked for play in the linkages, since this early design is more sensitive to wear than later hydraulic systems.
Sources: SpecCodex-Register: Kennwerte des Modells TK 46 H
Technical data
Engine
| Cylinders | 6correct |
|---|
Dimensions and weights
| Width | 2,050 mmcorrect |
|---|---|
| Wheelbase | 3,830 mmcorrect |
| Unladen weight | 2,640 kgcorrect |
| Gross vehicle weight | 4,763 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Stewart TK 46 H weigh?
The unladen weight is 2,640 kg.
What is the gross vehicle weight of the Stewart TK 46 H?
4,763 kg.
What engine does the Stewart TK 46 H have?
6 cylinders.
When was the Stewart TK 46 H built?
Production years: 1936.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: [1]
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.