Steiger Tiger
Built: 1969–1972 · Series: Serie-I
More machines from model year 1969
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Steiger Serie-I – the first articulated tractors from Fargo: Tiger and Turbo Tiger, 228 to 239 kW (310 to 320 hp) V8 diesel, 14,800 cc, kerb weight 12,500 kg
Steiger built articulated four-wheel-drive big tractors in Fargo, North Dakota, and named its early ranges after big cats; the Serie-I range with the Tiger and Turbo Tiger marks the brand's first model generation from the early 1970s, before later Series II and III lines expanded the programme. Its defining feature is the articulation joint between two equally sized axles, giving these large tractors tight manoeuvrability in the field despite their size.
Read on 3 more paragraphs
The register lists 2 variants at 228 to 239 kW (310 to 320 hp) from a V8 diesel engine of 14,800 cc, a kerb weight of 12,500 kg and a rated 2,300 rpm.
Steiger was one of the pioneers of the articulated big tractor in North America, and with the Serie-I served the large arable farms of the Great Plains that needed more power for heavy tillage than conventional standard tractors could offer; Case IH took over the brand in 1986, and the Fargo plant still builds large four-wheel-drive tractors today.
On these early articulated tractors, the condition of the articulation joint and its bearings matters, along with the tightness of the steering and implement hydraulics and the general state of the V8 diesel, including the turbocharger on the Turbo Tiger; cabs and wiring from these model years are often weak points. Parts today run mostly through Case IH Steiger channels and specialist big-tractor restorers.
Sources: SpecCodex register, model data: Steiger Serie-I
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Fuel | dieselcorrect |
| Power | 310 hp (228 kW)correct |
| Rated speed | 2,300 rpmcorrect |
| Rated speed | 2300/mincorrect |
| Cylinders | 8correct |
| Displacement | 14,800 cm³correct |
| Displacement | 14800 cm³correct |
| Cooling | water-cooledcorrect |
| Cooling system | water-cooledcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | 10v + 2rcorrect |
| Drive type | all-wheel drivecorrect |
| Construction type | articulated framecorrect |
Origin and approval
| Construction | articulated framecorrect |
|---|---|
| Production period | 1,969correct |
Frequently asked questions
How much power does the Steiger Tiger have?
The Steiger Tiger delivers 310 hp.
What engine does the Steiger Tiger have?
8 cylinders, 14,800 cm³ displacement, Diesel.
When was the Steiger Tiger built?
Production years: 1969–1972.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 20 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.