Spier ZGL 255
Built: 2017 · Series: Other models
More machines from model year 2017
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Spier – other models: the collective page of low-loader trailers outside the named ranges, SGL, ZGL, ZWL and ZPL type series, gross vehicle weight from 5 to 36 t, lengths up to 13.95 m
This page gathers the Spier trailers and semi-trailers the register could not assign to a named range. The SGL, SLG, SWL, ZGL, ZWL and ZPL type series differ in axle count and steering, followed by a number that rises with vehicle size within each series – from SGL110 to SGL390, from ZWL255 to ZWL290.
Read on 3 more paragraphs
The register lists 17 versions here with kerb weights from 2,550 to 11,120 kg, gross vehicle weights from 5,000 to 36,000 kg, lengths from 7,920 to 13,950 mm and widths from 2,370 to 2,550 mm.
With gross weights up to 36 t and lengths of almost 14 m, the models on this collective page belong to the low-loader and platform trailers for carrying construction machinery, vehicles and plant components, as used in construction and machinery haulage. The picture is rounded out by pivoting and extending frame sections, which let loads of different lengths fit on the same platform.
Buying used, check the frame and chassis rails for cracks and deformation from the high point loads, the axle units and steering axles for play, the brake system and air suspension, the ramps and their locks, and the condition of the load floor. Spare parts run through the Spier dealer network and the commercial-vehicle trade. On extendable frames, additionally check the locking in intermediate positions and the wear of the sliding rails.
Sources: SpecCodex register, model data: Spier (weitere Modelle)
Technical data
Dimensions and weights
| Length | 9,330 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 6,300 mmcorrect |
| Unladen weight | 3,850 kgcorrect |
| Gross vehicle weight | 10,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Spier ZGL 255 weigh?
The unladen weight is 3,850 kg.
What is the gross vehicle weight of the Spier ZGL 255?
10,000 kg.
Up to what speed is the Spier ZGL 255 approved?
Approved up to 100 km/h.
What are the dimensions of the Spier ZGL 255?
9,330 mm × 2,550 mm.
When was the Spier ZGL 255 built?
Production years: 2017.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
2 current listings for Spier ZGL 255 on Hutnia.com.
View offers on Hutnia.com →
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.