Technical register for agricultural, construction and commercial machinery · sourced data
Start › Mulchers & forestry heads › SP Maskiner › Other models › SP 561 LF Next Generation

SP Maskiner SP 561 LF Next Generation – specifications

Series: Other models

Build year not documented · Data origin: Manufacturer information · sources

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

SP Maskiner SP 461 LF Next Generation: Swedish harvester head for a harvester or excavator, felling trees, delimbing them and cutting them to length at the carrier

SP Maskiner is a Swedish manufacturer of forestry attachments, known mainly for harvester heads mounted on forestry machines and excavators. The SP 461 LF Next Generation is such a harvester head and is listed in the register as an attachment with no running gear of its own.

Read on 3 more paragraphs

As a carrier, the register names either a harvester or an excavator, depending on the model. This dual use is common for harvester heads: the head itself carries out felling, delimbing and measuring the trunk, while lifting force, reach and hydraulic supply depend on the chosen carrier machine and therefore determine which tree diameters can be handled.

A harvester head such as the SP 461 LF combines several operations in one tool: it grips the trunk with grapples or feed rollers, pulls it through delimbing knives and cuts it to preset lengths with a saw chain or guide bar. This design replaces the previously separate steps of felling, delimbing and measuring with a single machine pass, and it defines modern mechanised timber harvesting.

When buying a used harvester head, the condition of the feed rollers and their spikes matters, since worn rollers let the trunk slip and distort the length measurement. The saw bar and chain should be checked for wear and correct tension, the delimbing knives for sharpness, and all hydraulic hoses for cracks, as they are exposed to constant movement on the head.

Sources: SpecCodex-Register: Kennwerte des Modells SP Maskiner SP 461 LF Next Generation

Technical data

Other data

Carrier machineHarvester / Bagger (modellabhängig)correct

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 2 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.‌​‍‍​‌‌‍‌​‌‌⁠‌‌‌‍‌‍​

Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.

Check and complete the data →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Manufacturer documentation, spmaskiner.com (retrieved August 2026) · Dealer data sheet, spmaskiner.com (retrieved August 2026) · Data sources and cross-checks

Harvester in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare