Smit SD 1239 – specifications
Built: 1993 · Series: Other models
Data for the version built 1993 · Data origin: Official register · sources
More machines from model year 1993
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Smit – other models: the collective page of trailers outside the named ranges, from the light water trailer to heavy tank and special semi-trailers, 300 to 24,890 kg unladen weight, 900 to 39,000 kg gross weight
This page gathers the Smit trailers the register could not assign to a named range. The programme runs from light versions such as the 1860 Wateraanhangwagen – Dutch for water trailer, a mobile water supply on wheels – through the AW, ATS, DTEA and STO ranges to markedly heavier versions; one model simply carries the designation Mobile Equipment. The span of type designations from two- to four-digit numbers shows a programme combining several trailer classes under one brand.
Read on 3 more paragraphs
The register lists here 45 versions with unladen weights from 300 to 24,890 kg, gross weights from 900 to 39,000 kg, lengths from 4,180 to 13,790 mm and widths from 1,350 to 2,560 mm.
Such a span from the light water-trailer class to the heavy-transport semi-trailer occurs with makers whose range, alongside series models, also includes special versions for agriculture, water supply or construction and haulage.
On a used example, on the light water and utility trailers the condition of the tank or container, axle and lighting count, on the heavy versions additionally axles, braking system and frame under high payload and rust on load-bearing parts; spare parts, depending on the version, run through the general trailer market or specialist commercial-vehicle suppliers.
Sources: SpecCodex register, model data: Smit (weitere Modelle)
Technical data
Dimensions and weights
| Width | 2,500 mmcorrect |
|---|---|
| Coupling-to-axle distance | 916 mmcorrect |
| Unladen weight | 9,200 kgcorrect |
| Gross vehicle weight | 39,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Smit SD 1239 weigh?
The unladen weight is 9,200 kg.
What is the gross vehicle weight of the Smit SD 1239?
39,000 kg.
Up to what speed is the Smit SD 1239 approved?
Approved up to 100 km/h.
When was the Smit SD 1239 built?
Production years: 1993.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
DTEA 1000-1000
DTTA 400-1200
DTTAD 1000-1600
MAMMO 32
SDO 1239
SEO 12 22
SEO-1222
ST3-6
STO 1131
STO 1232
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
