Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Sisu › SK 210

Sisu SK 210

Built: 1988 · Series: SK

More machines from model year 1988

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Sisu SK 210 belongs to the SK series. Production: 1988. The engine delivers 216 kW, has 6 cylinders, with a displacement of 10,000 cm³. The machine is 8,100 mm long and 2,500 mm wide. The unladen weight is 10,150 kg. The gross vehicle weight is 27,000 kg. The SK series covers 74 models. Rated output within it ranges from 157 to 278 kW; the SK 210 sits in the middle of that range with 216 kW. Its immediate neighbours are the SK 210 CKH-6X2 below it with 213 kW and the SK 242 CK/410 above it with 240 kW. Unladen weight within it ranges from 7,050 to 28,550 kg; here the SK 210 sits at the bottom of that range with 10,150 kg. 1416 Sisu models across 44 series are on record.

Sisu SK – collective page for the Finnish heavy-duty series built for forestry, mining and military use, six-cylinder diesels from 157 to 278 kW, 6.6 to 10.8 litre displacement, gross weights up to 36 tonnes

The SK series covers the classic heavy trucks of the Finnish maker Sisu Auto, based in Karjaa with later production in Kankaanpää. Sisu was formed in 1931 out of Finland's state-owned motor industry and consistently built vehicles for local conditions: deep snow, unpaved forest tracks and severe cold. The SK models of the 1980s and 1990s all carried six-cylinder diesel engines and went to both civilian customers – mainly forestry and heavy-haulage operators – and the Finnish armed forces, which Sisu still supplies today. The abbreviations in the type codes (VK, CK, CA) refer to cab shape and drive configuration, while the axle count appears in designations such as 6X2, 6X4 or 8X2.

Read on 3 more paragraphs

The register lists 74 versions here with 157 to 278 kW from exclusively six-cylinder diesel engines of 6,600 to 10,820 cm³ displacement, kerb weights of 7,050 to 28,550 kg, gross vehicle weights of 15,000 to 36,000 kg, lengths of 6,300 to 11,500 mm and widths of 2,450 to 2,800 mm.

Sisu trucks are a fixture of forestry and heavy haulage in Finland as well as winter-service and military work, competing there with Scania, Volvo and the Finnish military versions of Mercedes-Benz; outside Finland and Scandinavia the brand is rarely seen, which limits parts availability regionally.

On a used SK, it is worth checking for frame cracks and corrosion on the axle suspension and subframe, typically stressed by road salt and off-road work, as well as the condition of the transfer case and four-wheel drive on the 6x4 and 8x2 variants. Engine and chassis parts are available through Sisu-authorised workshops in Finland; for examples outside Scandinavia, usually only with long lead times.

Sources: SpecCodex register, model data: Sisu SK, Sisu Auto (manufacturer)

Technical data

Engine

Power216 kWcorrect
Cylinders6correct
Displacement10,000 cm³correct

Dimensions and weights

Length8,100 mmcorrect
Width2,500 mmcorrect
Unladen weight10,150 kgcorrect
Gross vehicle weight27,000 kgcorrect

Where this model stands

Power-to-weight ratio: 21.3 kW/t (216 kW / 10.2 t)

Stronger than 33% of the trucks in the register — out of 25,241 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Sisu SK 210 have?

The Sisu SK 210 delivers 216 kW.

How much does the Sisu SK 210 weigh?

The unladen weight is 10,150 kg.

What is the gross vehicle weight of the Sisu SK 210?

27,000 kg.

What engine does the Sisu SK 210 have?

6 cylinders, 10,000 cm³ displacement.

What are the dimensions of the Sisu SK 210?

8,100 mm × 2,500 mm.

When was the Sisu SK 210 built?

Production years: 1988.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare