Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Sisu › R500 › R500 E13M 6X2

Sisu R500 E13M 6X2

Built: 2007 · Series: R500

More machines from model year 2007

Source: autoline.hk

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The R500 series from Sisu includes the R500 E13M 6X2. Production: 2007. The engine delivers 338 kW, with a displacement of 12,770 cm³. The vehicle is 8,580 mm long and 2,550 mm wide. The unladen weight is 10,715 kg. The gross vehicle weight is 30,000 kg. The R500 series covers 63 models. Rated output within it ranges from 324 to 390 kW; the R500 E13M 6X2 sits in the lower part of that range with 338 kW. Its immediate neighbours are the R500 E12M-10X2 below it with 324 kW and the R500 E12M-6X2 above it with 338.5 kW. Unladen weight within it ranges from 9,950 to 35,780 kg; here the R500 E13M 6X2 sits at the bottom of that range with 10,715 kg. 1416 Sisu models across 44 series are on record.

Sisu R500 – Finnish heavy chassis for construction, forestry and mining: 13-litre six-cylinder engines from 324 to 390 kW, axle configurations from 6x2 to 10x4, up to 54 t gross weight

Sisu Auto is a Finnish commercial-vehicle maker tracing back to state-run vehicle production founded in 1931; the R series comprises heavy, mostly multi-axle special chassis for construction, forestry and mining work, powered by engines from the former group partner Sisu Diesel, now AGCO Power. In the type codes, E13M denotes the six-cylinder 13-litre engine with manual gearbox, the following digits 6X2, 6X4, 8X2, 8X4, 10X2 and 10X4 describe axle count and drive, and letters such as K, A and P mark cab or body variants.

Read on 3 more paragraphs

The register lists 63 versions with 324 to 390 kW from six-cylinder engines of 12,130 to 12,780 cm³, unladen weights of 9,950 to 35,780 kg, gross vehicle weights of 30,000 to 54,000 kg, lengths of 8,015 to 13,000 mm and widths of 2,480 to 2,800 mm.

The R500 serves the heavy special-chassis segment in Finland and Scandinavia for timber haulage, earthmoving and gravel work, and mining, often fitted with crane or tipper bodies; competitors are Scania, Volvo and multi-axle special variants from Mercedes-Benz, against which Sisu positions itself on extreme off-road capability and rugged axle engineering.

When buying used, check the condition of the frame and axle suspension after years of off-road use, wear on differential locks and the transfer case, the state of any crane or tipper body, and the operating hours on the AGCO Power engine; parts run through Sisu Auto and the AGCO Power service network, sometimes with long lead times on older model years.

Sources: SpecCodex register, model data: Sisu R500, Sisu Auto

Technical data

Engine

Power338 kWcorrect
Displacement12,770 cm³correct

Dimensions and weights

Length8,580 mmcorrect
Width2,550 mmcorrect
Unladen weight10,715 kgcorrect
Gross vehicle weight30,000 kgcorrect

Where this model stands

Power-to-weight ratio: 31.5 kW/t (338 kW / 10.7 t)

Stronger than 69% of the trucks in the register — out of 25,242 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Sisu R500 E13M 6X2 have?

The Sisu R500 E13M 6X2 delivers 338 kW.

How much does the Sisu R500 E13M 6X2 weigh?

The unladen weight is 10,715 kg.

What is the gross vehicle weight of the Sisu R500 E13M 6X2?

30,000 kg.

What engine does the Sisu R500 E13M 6X2 have?

12,770 cm³ displacement.

What are the dimensions of the Sisu R500 E13M 6X2?

8,580 mm × 2,550 mm.

When was the Sisu R500 E13M 6X2 built?

Production years: 2007.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare