Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Sisu › R500 › R500 E12M-8X4

Sisu R500 E12M-8X4

Built: 2006-2007 · Series: R500

More machines from model year 2006

Source: truck1.eu

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Sisu R500 E12M-8X4 is a model in the R500 series. Production: 2006-2007. The engine delivers 353 kW, has 6 cylinders, with a displacement of 12,130 cm³. The vehicle is 8,880 mm long and 2,550 mm wide. The unladen weight is 15,070 kg. The gross vehicle weight is 41,500 kg. The gearbox offers 12 gears. The R500 series covers 63 models. Rated output within it ranges from 324 to 390 kW; the R500 E12M-8X4 sits in the middle of that range with 353 kW. Its immediate neighbours are the R500 E12M-6X2 below it with 338.5 kW and the R500 E13M KK-AKK-10x2 above it with 360 kW. Unladen weight within it ranges from 9,950 to 35,780 kg; here the R500 E12M-8X4 sits in the lower part of that range with 15,070 kg. 1416 Sisu models across 44 series are on record.

Sisu R500 – Finnish heavy chassis for construction, forestry and mining: 13-litre six-cylinder engines from 324 to 390 kW, axle configurations from 6x2 to 10x4, up to 54 t gross weight

Sisu Auto is a Finnish commercial-vehicle maker tracing back to state-run vehicle production founded in 1931; the R series comprises heavy, mostly multi-axle special chassis for construction, forestry and mining work, powered by engines from the former group partner Sisu Diesel, now AGCO Power. In the type codes, E13M denotes the six-cylinder 13-litre engine with manual gearbox, the following digits 6X2, 6X4, 8X2, 8X4, 10X2 and 10X4 describe axle count and drive, and letters such as K, A and P mark cab or body variants.

Read on 3 more paragraphs

The register lists 63 versions with 324 to 390 kW from six-cylinder engines of 12,130 to 12,780 cm³, unladen weights of 9,950 to 35,780 kg, gross vehicle weights of 30,000 to 54,000 kg, lengths of 8,015 to 13,000 mm and widths of 2,480 to 2,800 mm.

The R500 serves the heavy special-chassis segment in Finland and Scandinavia for timber haulage, earthmoving and gravel work, and mining, often fitted with crane or tipper bodies; competitors are Scania, Volvo and multi-axle special variants from Mercedes-Benz, against which Sisu positions itself on extreme off-road capability and rugged axle engineering.

When buying used, check the condition of the frame and axle suspension after years of off-road use, wear on differential locks and the transfer case, the state of any crane or tipper body, and the operating hours on the AGCO Power engine; parts run through Sisu Auto and the AGCO Power service network, sometimes with long lead times on older model years.

Sources: SpecCodex register, model data: Sisu R500, Sisu Auto

Technical data

Engine

Power353 kWcorrect
Cylinders6correct
Displacement12,130 cm³correct

Dimensions and weights

Length8,880 mmcorrect
Width2,550 mmcorrect
Unladen weight15,070 kgcorrect
Gross vehicle weight41,500 kgcorrect

Drivetrain and chassis

Gears12correct

Where this model stands

Power-to-weight ratio: 23.4 kW/t (353 kW / 15.1 t)

Stronger than 76% of the trucks in the register — out of 25,242 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Sisu R500 E12M-8X4 have?

The Sisu R500 E12M-8X4 delivers 353 kW.

How much does the Sisu R500 E12M-8X4 weigh?

The unladen weight is 15,070 kg.

What is the gross vehicle weight of the Sisu R500 E12M-8X4?

41,500 kg.

What engine does the Sisu R500 E12M-8X4 have?

6 cylinders, 12,130 cm³ displacement.

What are the dimensions of the Sisu R500 E12M-8X4?

8,880 mm × 2,550 mm.

When was the Sisu R500 E12M-8X4 built?

Production years: 2006-2007.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare