Technical register for agricultural, construction and commercial machinery · sourced data
Scanner Parts Sign in
Start › Electric motors › Siemens › 1PP › 1PP718-2AA90-Z

Siemens 1PP718-2AA90-Z

Series: 1PP

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Siemens 1PP718-2AA90-Z is a three-phase induction motor from the Siemens range. The rated output is 5.5 kW. The motor is two-pole, which at 50 Hz gives a synchronous speed of 3,000 rpm. The rated voltage is 415 V. The housing is frame size 112 M in foot-mounted form. The protection class is IP54. The efficiency is 89.5 per cent at full load, 89.5 per cent at 75 per cent load and 88.5 per cent at half load. The motor is built in Germany. The data is based on the Australian MEPS registration under standard AS/NZS 1359.5:2004; measured to IEC 60034-2-1 (Edition 2.0). Rated output across the Siemens range ranges from 0.75 to 200 kW; the 1PP718-2AA90-Z sits at the bottom of that range with 5.5 kW. Its immediate neighbours are the 1LE10031BB234AB4-Z below it with 4 kW and the 1AV2162C above it with 7.5 kW. 569 Siemens models across 4 series are on record.

Siemens – 1PP series at a glance

The 1PP series from Siemens comprises 11 models in the register, in the Electric motors group. Rated power ranges from 6 to 22 kW. Listed in the register: 1 PP9 169-2, 1PP71692AA91Z, 1PP718-2AA90-Z, 1PP9119-2XA92.

Sources: SpecCodex-Register (eigene Daten)

Technical data

Engine

Rated output5.5 kWcorrect

Electrical data

Rated voltage415 Vcorrect
Number of poles2correct
Protection classIP54correct
Frame size112 M (foot)correct
Mounting (IEC 60034-7)IM B3correct
Efficiency at full load89.5 %correct
Efficiency at 75 % load89.5 %correct
Efficiency at half load88.5 %correct

Origin and approval

Country of manufactureGermanycorrect

Other data

Standard appliedAS/NZS 1359.5:2004correct
Test methodIEC 60034-2-1 (Edition 2.0)correct

Frequently asked questions

How much power does the Siemens 1PP718-2AA90-Z have?

The Siemens 1PP718-2AA90-Z delivers 5.5 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

1 PP9 169-2

1PP71692AA91Z

1PP9119-2XA92

1PP9119-2XA92-ZN00

1PP9119-2XA92-ZN10

1PP91192AA92-Z

1PP9164-2AA91-Z

1PP91642LA91Z

1PP9166-2AA91-Z

1PP91662LA91Z

Sources: Energy Rating — Australian government equipment register (retrieved August 2026) · How we check the data

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare