Technical register for agricultural, construction and commercial machinery · sourced data

Shuttlelift 3330FL

Series: Shuttlelift Hydraulic Truck Crane

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Shuttlelift Hydraulic Truck Crane series from Shuttlelift includes the 3330FL. The engine delivers 100.4 hp (73.8 kW), with a displacement of 3,300.4 cm³. Rated speed is 2,600 rpm. The unladen weight is 6,885 kg. Ground clearance is 253 mm. The gearbox has 4 forward gears. There are also 4 reverse gears. The electrical system runs on 12 V. Tyre size: 10,00x15 14PR. The Shuttlelift Hydraulic Truck Crane series covers 7 models. Rated output within it ranges from 85.7 to 131.9 hp; the 3330FL sits in the lower part of that range with 100.4 hp. Its immediate neighbours are the 5540F below it with 85.7 hp and the 5560B above it with 100.7 hp. Unladen weight within it ranges from 6,078 to 19,504.5 kg; here the 3330FL sits at the bottom of that range with 6,885 kg. 7 Shuttlelift models are on record.

Shuttlelift cranes 3330 to 7755 – the carry-deck and industrial cranes from Sturgeon Bay, Wisconsin: the first digits as capacity class, F and B as versions, four-cylinders of 3.3 to 4.5 litres, 63 to 97 kW

Shuttlelift of Sturgeon Bay, Wisconsin, is, beside Broderson, the second American specialist for carry-deck cranes – compact self-propelled cranes with telescopic boom, all-wheel steering and load deck that lift loads in factory halls, refineries, power stations and shipyards and drive straight to the installation point; the company belongs to the Manitowoc group and also builds gantry cranes for boats and precast concrete. The type logic: the first digits order the capacity class in ascending order – 3330 and 3339 about 8 to 9 US tons, 3340 about 10, 5540 and 5560 about 15 to 18, 7755 about 22 US tons – the following digits give the boom length by factory logic, F and B mark versions and generations, FL a variant with long boom. The engines are four-cylinders of 3.3 to 4.5 litres at 2,500 to 2,600 rpm – as diesel, petrol or LPG versions, LPG being the rule indoors.

Read on 3 more paragraphs

The register lists 7 versions with 63 to 97 kW from engines of 3,300 to 4,502 cm³ and service weights from 6,078 to 19,505 kg.

The carry-deck crane is an American speciality hardly known in Europe; Shuttlelift and Broderson share the market of maintenance departments and shipyards, in which mini cranes and telehandlers take over the job in Europe.

On used cranes, operating hours, the condition of telescopic boom, slew ring and outriggers, all-wheel steering, gas system on LPG engines, load-moment limiter and inspection history count; parts run through Shuttlelift and the engine makers.

Sources: SpecCodex register, model data: Shuttlelift Krane, Shuttlelift (Hersteller, Sturgeon Bay, Wisconsin)

Technical data

Engine

Power100.4 hp (73.8 kW)correct
Rated speed2,600 rpmcorrect
Displacement3,300.4 cm³correct

Dimensions and weights

Ground clearance253 mmcorrect
Unladen weight6,885 kgcorrect

Drivetrain and chassis

Gearbox typeClark synchromeshcorrect
Forward gears4correct
Reverse gears4correct
Tyre size10.00x15 14PRcorrect

Other data

System voltage12 Vcorrect

Where this model stands

Power-to-weight ratio: 10.7 kW/t (74 kW / 6.9 t)

Stronger than 2% of the mobile & rough terrain cranes in the register — out of 723 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Shuttlelift 3330FL have?

The Shuttlelift 3330FL delivers 100 hp.

How much does the Shuttlelift 3330FL weigh?

The unladen weight is 6,885 kg.

What engine does the Shuttlelift 3330FL have?

3,300 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RitchieSpecs equipment specifications (retrieved August 2026) · How we check the data

Mobile crane in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare