Technical register for agricultural, construction and commercial machinery · sourced data
Scanner Parts Sign in
Start › Electric motors › Scorpion › YSS100L2-4

Scorpion YSS100L2-4

Series: Other models

The photo shows the YSS112M-2 from the same series. Source: https://www.claas.com/ru-az/sel-skokhozyaystvennyye-mashiny/

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Scorpion YSS100L2-4 is a three-phase induction motor from the Scorpion range. The rated output is 3 kW. The motor is four-pole, which at 50 Hz gives a synchronous speed of 1,500 rpm. The housing is frame size 100 L in foot-mounted form. The efficiency is 86.5 per cent at full load, 86.2 per cent at 75 per cent load and 85.6 per cent at half load. Mounting arrangements to IEC 60034-7: B3, B5 and B14. The motor is built in China. The values are recorded in the Australian MEPS registration under standard AS/NZS 1359.5:2004; measured to IEC 60034-2-1 (Edition 2.0). Rated output across the Scorpion range ranges from 0.75 to 75 kW; the YSS100L2-4 sits at the bottom of that range with 3 kW. Its immediate neighbours are the YSS90L-2 below it with 2.2 kW and the MS112M-4 above it with 4 kW. 71 Scorpion models across 2 series are on record.

Scorpion – other models: the collective page of MEPS-registered three-phase motors outside the named ranges, manufactured in China, frame sizes 80 to 280, 0.75 to 75 kW, 2- to 6-pole

This page gathers the Scorpion three-phase motors the Australian energy-efficiency register could not assign to a named range. No confirmed data on the company itself is available. The identifiers in the register are inconsistent: alongside the MS code (e.g. MS100L-2, MS132S4), designations with other prefixes also appear.

Read on 3 more paragraphs

The register lists here 64 versions with 0.75 to 75 kW, two- to six-pole, full-load efficiencies from 74 to 93.77% and at 75% load from 72.89 to 93.9%. Frame sizes run from 80 to 280, protection is mostly IP55 (60), alongside IP66 (4). China is recorded throughout as the manufacturing country. Testing mostly followed AS/NZS 1359.5:2004 (33) and the older 2000 Legacy standard (30), with test methods B (53) and A (11); of 64 motors, only 1 carries a documented High Efficiency Level, the remaining 63 stay unclassified.

Scorpion thus appears as one of several value-priced suppliers in the Australian market, with a range of small to medium standard motors for pumps, fans and general drive tasks.

When buying used, what matters is bearing condition and a checked insulation resistance of the winding, visible corrosion on the terminal box and fan cover, the condition of shaft and key, and a legible nameplate with frame size and pole count; since practically none of the motors carries a High Efficiency classification, actual efficiency should be measured if in doubt. Spares and support depend on the distribution channel.

Sources: SpecCodex register, model data: Scorpion, Zulassungsdaten GEMS/MEPS (Australien)

Technical data

Engine

Rated output3 kWcorrect

Electrical data

Rated voltage240/415 Vcorrect
Number of poles4correct
Protection class1P66correct
Frame size100 L (foot)correct
Mounting (IEC 60034-7)B3, B5, B14, B3/5, B3/14correct
Efficiency at full load86.5 %correct
Efficiency at 75 % load86.2 %correct
Efficiency at half load85.6 %correct

Origin and approval

Country of manufactureChinacorrect

Other data

Standard appliedAS/NZS 1359.5:2004correct
Test methodIEC 60034-2-1 (Edition 2.0)correct

Frequently asked questions

How much power does the Scorpion YSS100L2-4 have?

The Scorpion YSS100L2-4 delivers 3 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

MS100L-2

MS100L1-4

MS100L2

MS100LA4

MS100LB4

MS112M-4

MS112M2

MS112M4

MS132M4

MS132S-4

MS132S4

MS132SA2

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare