Scorpion Y160M-6 – specifications
Series: Other models
The Scorpion Y160M-6 is a three-phase induction motor built by Scorpion. The rated output is 7.5 kW. The motor is six-pole, which at 50 Hz gives a synchronous speed of 1,000 rpm. The rated voltage is 415 V. The housing is frame size 160 M in foot-mounted form. The protection class is IP55. The efficiency is 86.6 per cent at full load, 88 per cent at 75 per cent load and 87 per cent at half load. The mounting arrangement to IEC 60034-7 is B3. The motor is built in China. The figures come from the Australian MEPS register under standard AS/NZS 1359.5:2004; measured to IEC 60034-2-1 (Edition 2.0). Rated output across the Scorpion range ranges from 0.75 to 75 kW; the Y160M-6 sits at the bottom of that range with 7.5 kW. Its immediate neighbours are the YSSS132S-4 below it with 5.5 kW and the Y160L-6 above it with 11 kW. 71 Scorpion models across 2 series are on record.
Build year not documented · Data origin: Official register · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Scorpion – other models: the collective page of MEPS-registered three-phase motors outside the named ranges, manufactured in China, frame sizes 80 to 280, 0.75 to 75 kW, 2- to 6-pole
This page gathers the Scorpion three-phase motors the Australian energy-efficiency register could not assign to a named range. No confirmed data on the company itself is available. The identifiers in the register are inconsistent: alongside the MS code (e.g. MS100L-2, MS132S4), designations with other prefixes also appear.
Read on 3 more paragraphs
The register lists here 64 versions with 0.75 to 75 kW, two- to six-pole, full-load efficiencies from 74 to 93.77% and at 75% load from 72.89 to 93.9%. Frame sizes run from 80 to 280, protection is mostly IP55 (60), alongside IP66 (4). China is recorded throughout as the manufacturing country. Testing mostly followed AS/NZS 1359.5:2004 (33) and the older 2000 Legacy standard (30), with test methods B (53) and A (11); of 64 motors, only 1 carries a documented High Efficiency Level, the remaining 63 stay unclassified.
Scorpion thus appears as one of several value-priced suppliers in the Australian market, with a range of small to medium standard motors for pumps, fans and general drive tasks.
When buying used, what matters is bearing condition and a checked insulation resistance of the winding, visible corrosion on the terminal box and fan cover, the condition of shaft and key, and a legible nameplate with frame size and pole count; since practically none of the motors carries a High Efficiency classification, actual efficiency should be measured if in doubt. Spares and support depend on the distribution channel.
Sources: SpecCodex register, model data: Scorpion, Zulassungsdaten GEMS/MEPS (Australien)
Technical data
Engine
| Rated output | 7.5 kWcorrect |
|---|
Electrical data
| Rated voltage | 415 Vcorrect |
|---|---|
| Number of poles | 6correct |
| Protection class | IP55correct |
| Frame size | 160 M (foot)correct |
| Mounting (IEC 60034-7) | B3, B3/B5correct |
| Efficiency at full load | 86.64 %correct |
| Efficiency at 75 % load | 88 %correct |
| Efficiency at half load | 87 %correct |
Origin and approval
| Country of manufacture | Chinacorrect |
|---|
Other data
| Standard applied | AS/NZS 1359.5:2004correct |
|---|---|
| Test method | IEC 60034-2-1 (Edition 2.0)correct |
Frequently asked questions
What to check before buying
- Match the data plate against the order: frame size, mounting and rating have to agree.
- Check the ingress rating against the installation site — outdoors or in dust the demands differ.
- Hold the mounting form and dimensions against the existing seat before ordering.
- The pole count sets the speed — when replacing an older unit, compare this first.
- For used units, ask about winding condition and bearing play.
- Ask about parts availability for this series — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
MS100L-2
MS100L1-4
MS100L2
MS100LA4
MS100LB4
MS112M-4
MS112M2
MS112M4
MS132M4
MS132S-4
MS132S4
MS132SA2
Sources: Energy Rating — Australian government equipment register (retrieved August 2026) · Data sources and cross-checks
Electric motor in 3D section
Turn the model, look inside and click an assembly — each one is explained.