Schroeder Wiesmoor AT40P1
Built: 2005 · Series: Other models
More machines from model year 2005
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Schroeder Wiesmoor – other models: the collective page of low-loaders and special-transport trailers outside the named ranges, widths up to 2,750 mm, gross weights up to 40,000 kg
This collective page gathers the Schroeder Wiesmoor models the register could not assign to a named range. The type codes AS, AT, AZ, S, ST, TA and ZA combine with multi-part number strings such as AS13/27P3-13,6HDE2 and TA40-1175-C-6-3 into individual, unusually long model names. Widths up to 2.75 metres exceed the regular road width of 2.55 metres and point to vehicles built for permit-required special transport.
Read on 3 more paragraphs
The register lists here 14 versions with unladen weights from 2,350 to 10,570 kg, gross weights from 2,500 to 40,000 kg, lengths from 8,350 to 13,800 mm and widths from 2,480 to 2,750 mm.
Trailers across this span from 2.5 to 40 tonnes cover the transition from the light low-loader to the heavy special-transport trailer; the wider versions over 2.55 metres are built for construction machinery, farm equipment or other bulky loads that need an over-width bed, while the narrower models travel in regular road traffic without an escort, and the gross weights above 3.5 tonnes require a matching driving licence category.
On a used example, the condition of frame and ramps, the function of any hydraulics, axle and brake condition, the airtightness of the air suspension and even tyre wear across the multiple axles all count; on the over-width versions, valid special-transport permits and the condition of the warning panels and marker lights also matter.
Sources: SpecCodex register, model data: Schroeder Wiesmoor (weitere Modelle)
Technical data
Dimensions and weights
| Length | 11,850 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 7,120 mmcorrect |
| Unladen weight | 9,360 kgcorrect |
| Gross vehicle weight | 36,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Schroeder Wiesmoor AT40P1 weigh?
The unladen weight is 9,360 kg.
What is the gross vehicle weight of the Schroeder Wiesmoor AT40P1?
36,000 kg.
Up to what speed is the Schroeder Wiesmoor AT40P1 approved?
Approved up to 100 km/h.
What are the dimensions of the Schroeder Wiesmoor AT40P1?
11,850 mm × 2,550 mm.
When was the Schroeder Wiesmoor AT40P1 built?
Production years: 2005.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
A1BV7-7.45
AS13/27P3-13,6HDE2
AS9.5/10V4-11LB-10
S30 1347 C 4 3
SCHROEDER
ST 11/24 P4-13,3
ST11/24P4-13.2 H&M12926S
ZA 8.6-1219
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
