Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Schlüter › Profi Trac 2000 VL

Schlüter Profi Trac 2000 VL

Built: 1976 · Series: Profi Trac-Baureihe

More machines from model year 1976

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Schlüter Profi Trac 2000 VL belongs to the Profi Trac series. Production: 1976. The engine delivers 200 hp (147 kW), has 5 cylinders, with a displacement of 9,511 cm³. Rated speed is 2,200 rpm. The machine is 6,000 mm long, 2,450 mm wide and 3,425 mm high. The unladen weight is 9,500 kg. The wheelbase measures 2,850 mm. Ground clearance is 465 mm. Top speed is 31.9 km/h. The tank holds 445 litres. Transmission: 8V / 2R. The engine is water-cooled. Tyres: front 18.4 R 38, rear 18.4 R 38. The fuel is diesel. The bore measures 125 mm. The stroke is 155 mm. The linkage is category III. Around 1 units were built. The Profi Trac-Baureihe series covers 9 models. Rated output within it ranges from 160 to 500 hp; the Profi Trac 2000 VL sits at the bottom of that range with 200 hp. Its immediate neighbours are the Profi Trac 1600 TVL below it with 160 hp and the Profi Trac 2200 TVL above it with 210 hp. Unladen weight within it ranges from 9,000 to 18,000 kg; here the Profi Trac 2000 VL sits at the bottom of that range with 9,500 kg. 91 Schlüter models across 19 series are on record.

Schlüter Profi Trac (1978–1993) – the systems tractor from Freising: 1600 TVL to 5000 TVL, the number as power class, V for four-wheel drive, T for turbocharger, Schlüter and MAN engines of 7.1 to 20.9 litres

The Profi Trac was Schlüter's answer to the question of what a tractor beyond 150 hp should look like: not an enlarged standard tractor but a systems vehicle with four equal wheels, all-wheel steering, centrally mounted cab and mounting spaces front and rear – the Freising maker presented it in 1978 and built it until the end of tractor production in 1993. The type logic: the number gives the power class in tenths of hp – Profi Trac 1600 about 160 hp, 2500 250 hp, 5000 500 hp – V stands for four-wheel drive, T for the turbocharger (the VL versions are the naturally aspirated variants). The engines are Schlüter's own five- and six-cylinders in the smaller models, MAN engines in the big ones up to the V12 of 20.9 litres in the 5000 TVL, the most powerful tractor ever series-built in Germany; the register span of 5 to 12 cylinders and 7,127 to 20,911 cm³ shows that breadth.

Read on 3 more paragraphs

The register lists 9 versions with 117.1 to 368 kW, unladen weights from 9,000 to 18,000 kg, lengths from 5,670 to 6,450 mm, widths from 2,450 to 2,720 mm and heights from 3,160 to 3,460 mm.

The Profi Trac remained a niche product for contractors, large farms and municipal use, but its concept lived on: Fendt Xylon, JCB Fastrac and Claas Xerion followed the idea of the systems tractor.

Used Profi Tracs are collectors' items with prices depending on condition; engine (MAN parts are better available than Schlüter parts), transmission and all-wheel steering, hydraulics, cab and sheet metal count.

Sources: SpecCodex register, model data: Schlüter Profi Trac, Schlüter (Traktorenhersteller) (Wikipedia)

Technical data

Engine

Fueldieselcorrect
Power200 hp (147 kW)correct
Rated speed2,200 rpmcorrect
Cylinders5correct
Displacement9,511 cm³correct
Bore125 mmcorrect
Stroke155 mmcorrect
Coolingwater-cooledcorrect

Dimensions and weights

Length6,000 mmcorrect
Width2,450 mmcorrect
Height3,425 mmcorrect
Wheelbase2,850 mmcorrect
Ground clearance465 mmcorrect
Unladen weight9,500 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Gearbox8V / 2Rcorrect
Front tyres18.4 R 38correct
Rear tyres18.4 R 38correct
Top speed31.9 km/hcorrect

Working data

Fuel tank capacity445 lcorrect

Origin and approval

Units built1correct

Other data

Linkage categoryCat IIIcorrect

Where this model stands

Power-to-weight ratio: 15.5 kW/t (147 kW / 9.5 t)

Power class: Heavy (> 180 hp)

Stronger than 91% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Schlüter Profi Trac 2000 VL have?

The Schlüter Profi Trac 2000 VL delivers 200 hp.

How much does the Schlüter Profi Trac 2000 VL weigh?

The unladen weight is 9,500 kg.

What engine does the Schlüter Profi Trac 2000 VL have?

5 cylinders, 9,511 cm³ displacement, Diesel.

How fast does the Schlüter Profi Trac 2000 VL go?

Top speed is 31.9 km/h.

What are the dimensions of the Schlüter Profi Trac 2000 VL?

6,000 mm × 2,450 mm × 3,425 mm.

When was the Schlüter Profi Trac 2000 VL built?

Production years: 1976.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare