Schiltrac 9075
Built: 1995–1998 · Series: 9000
More machines from model year 1995
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Schiltrac 9000 – Swiss transporter range: 9050 and 9075, three-cylinder diesels of 2,826 to 3,117 cm³, 43 to 55 kW, lengths from 6,020 to 6,370 mm at only 1,910 kg unladen weight
Schiltrac is a Swiss maker of transporters, that class of vehicle with a low centre of gravity and a long load platform built for mountain and farm use; the register lists here the 9000 range with the 9050 and 9075 models, whose names, as usual for transporters, point to the power class. Characteristic of this design is the ratio of length to weight: at only 1,910 kg unladen weight, both models reach a length of over 6 metres, which points to a long, low-lying load platform rather than a compact tractor body.
Read on 3 more paragraphs
The register lists here 2 versions with 43 to 55 kW, or 58 to 75 hp, from a three-cylinder of 2,826 to 3,117 cm³ at 2,400 to 2,500 revolutions per minute. Unladen weight is 1,910 kg, lengths run from 6,020 to 6,370 mm, width is 2,460 mm and heights from 2,160 to 2,280 mm.
Transporters of this design are common in Swiss and Alpine farming for transport on steep, difficult terrain, where their low centre of gravity and long, low load platform offer advantages over a classic farm tractor with a trailer.
On a used Schiltrac 9000, operating hours and the condition of the three-cylinder diesel, the state of the gearbox and axles given work on steep ground, tightness of the hydraulics for the load platform, and corrosion on the long frame and platform matter.
Sources: SpecCodex register, model data: Schiltrac 9000
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 75 hp (55 kW)correct |
| Rated speed | 2,400 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 3,117 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 6,370 mmcorrect |
|---|---|
| Width | 2,460 mmcorrect |
| Height | 2,280 mmcorrect |
| Wheelbase | 3,240 mmcorrect |
| Ground clearance | 431 mmcorrect |
| Unladen weight | 1,910 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | 8/8correct |
| Forward gears | 8correct |
| Reverse gears | 8correct |
| Front tyres | 11.5/80-15.3correct |
| Rear tyres | 11.5/80-15.3correct |
| Top speed | 30 km/hcorrect |
Working data
| Fuel tank capacity | 36 lcorrect |
|---|
Origin and approval
| Construction | frame constructioncorrect |
|---|
Where this model stands
Power-to-weight ratio: 28.8 kW/t (55 kW / 1.9 t)
Power class: Universal (40–100 hp)
Stronger than 51% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Schiltrac 9075 have?
The Schiltrac 9075 delivers 75 hp.
How much does the Schiltrac 9075 weigh?
The unladen weight is 1,910 kg.
What engine does the Schiltrac 9075 have?
3 cylinders, 3,117 cm³ displacement, Diesel.
How fast does the Schiltrac 9075 go?
Top speed is 30 km/h.
What are the dimensions of the Schiltrac 9075?
6,370 mm × 2,460 mm × 2,280 mm.
When was the Schiltrac 9075 built?
Production years: 1995–1998.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 23 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.