Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Scania › TM 4X2 › TM 4X2 ZL 65100

Scania TM 4X2 ZL 65100

Built: 1987 · Series: TM 4X2

More machines from model year 1987

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The TM 4X2 series from Scania includes the TM 4X2 ZL 65100. Production: 1987. The engine has 6 cylinders. The vehicle is 7,900 mm long and 2,500 mm wide. The unladen weight is 6,680 kg. The wheelbase measures 4,650 mm. The gross vehicle weight is 17,500 kg. The vehicle runs on 4 wheels. The TM 4X2 series covers 8 models. Unladen weight within it ranges from 6,485 to 11,240 kg; the TM 4X2 ZL 65100 sits at the bottom of that range with 6,680 kg. Its immediate neighbours are the TM 4X2 ZS 65100 below it with 6,602 kg and the TM 4X2 ZS above it with 7,150 kg. Gross vehicle weight within it ranges from 11,995 to 24,000 kg; here the TM 4X2 ZL 65100 sits in the middle of that range with 17,500 kg. 11893 Scania models across 91 series are on record.

Scania TM 4X2 – tractor units and chassis of the TM range for transport and municipal use: 8 versions, 7.8 to 14 litres displacement, 12 to 24 tonnes gross vehicle weight

This collective page gathers Scania TM-range vehicles, listed as tractor units (ZL, ZS) and chassis in two- and three-axle configurations (4X2, 6X2). Model designations such as ZL 60100 or ZS 65100 reflect internal equipment and axle-load codes; the range spans from medium six-cylinder to heavy eight-cylinder engines.

Read on 3 more paragraphs

The register lists 8 versions from six- and eight-cylinder engines of 7,790 to 14,000 cm³. Unladen weights range from 6,485 to 11,240 kg, gross vehicle weights from 11,995 to 24,000 kg, lengths from 5,990 to 7,900 mm and widths from 2,500 to 2,570 mm.

With this spread of weight classes, the TM range covers both medium distribution transport and heavier tractor-unit tasks, sitting between Scania's light distribution chassis and its heavy long-haul chassis. Typical uses are regional freight, municipal services and construction-site supply. On the used market, TM chassis appear both as complete tractor units and as bare chassis for body builders who fit their own box, tipper or tanker bodies.

When buying a used TM vehicle, check the condition of the clutch and gearbox, rust on the frame and body fittings, tightness of the cooling system, and on tractor units the condition of the fifth wheel and air suspension. The Scania parts network reliably covers drivetrain and chassis. On intensively used chassis it is also worth checking the brakes and air-suspension bellows, which wear faster under constant load than on pure long-haul tractors.

Sources: SpecCodex register, model data: Scania TM 4X2, Scania (manufacturer)

Technical data

Engine

Cylinders6correct

Dimensions and weights

Length7,900 mmcorrect
Width2,500 mmcorrect
Wheelbase4,650 mmcorrect
Unladen weight6,680 kgcorrect
Gross vehicle weight17,500 kgcorrect

Drivetrain and chassis

Wheels4correct

Frequently asked questions

How much does the Scania TM 4X2 ZL 65100 weigh?

The unladen weight is 6,680 kg.

What is the gross vehicle weight of the Scania TM 4X2 ZL 65100?

17,500 kg.

What engine does the Scania TM 4X2 ZL 65100 have?

6 cylinders.

What are the dimensions of the Scania TM 4X2 ZL 65100?

7,900 mm × 2,500 mm.

When was the Scania TM 4X2 ZL 65100 built?

Production years: 1987.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare