Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Scania › R500

Scania R500

Built: 2005-2026 · Series: R500

More machines from model year 2005

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the R500, Scania offers a model from the R500 series. Production: 2005-2026. The engine delivers 368 kW, has 8 cylinders, with a displacement of 16,400 cm³. The machine is 12,000 mm long and 2,600 mm wide. The unladen weight is 37,575 kg. The wheelbase measures 8,450 mm. Top speed is 107 km/h. The gross vehicle weight is 47,000 kg. The machine runs on 14 wheels. The gearbox offers 12 gears. The R500 series covers 29 models. Rated output within it ranges from 368 to 390 kW; the R500 sits at the bottom of that range with 368 kW. Its immediate neighbours are the R500 6X4 above it with 390 kW. Unladen weight within it ranges from 9,255 to 37,575 kg; here the R500 sits at the top of that range with 37,575 kg. 11893 Scania models across 91 series are on record.

Scania R500 – the collective page of tractor units and trucks with about 500 hp, six- and eight-cylinder engines of 12.7 to 16.4 litres, the XT construction version and the Longline cab, gross weights up to 47 tonnes

This page gathers the Scania R500, the 500 hp power step of the R range the Swedish maker from Södertälje introduced in 2004. The number 500 in the type designation gives the approximate engine output in hp, the axle formula (4X2, 6X2, 6X4, 8x4, 10X4) the number of driven and steered axles; LA and LB mark different chassis versions. The model list also contains the XT construction version for construction and off-road use and the Longliner cab, an extended long-haul cab for especially generous space in the driver's cab.

Read on 3 more paragraphs

The register lists here 29 versions with outputs from 368 to 390 kW from six- and eight-cylinders of 12,742 to 16,400 cm³, unladen weights from 7,400 to 37,575 kg, gross weights from 19,000 to 47,000 kg, lengths from 5,890 to 12,000 mm and widths from 2,500 to 2,600 mm.

For years the R range was Scania's flagship in long-haul transport, and the 500 hp step is among the most frequently chosen engines for tractor units in European road haulage; the XT version also opened the range to construction and municipal use.

On used examples, operating hours and mileage, the condition of the engine and turbocharger, the transmission (manual or automated Opticruise), air suspension and the fifth wheel, and the electronics and exhaust aftertreatment count; parts run through the dense Scania service network.

Sources: SpecCodex register, model data: Scania R500, Scania (manufacturer)

Technical data

Engine

Power368 kWcorrect
Cylinders8correct
Displacement16,400 cm³correct

Dimensions and weights

Length12,000 mmcorrect
Width2,600 mmcorrect
Wheelbase8,450 mmcorrect
Unladen weight37,575 kgcorrect
Gross vehicle weight47,000 kgcorrect

Drivetrain and chassis

Gears12correct
Wheels14correct
Top speed107 km/hcorrect

Where this model stands

Power-to-weight ratio: 9.8 kW/t (368 kW / 37.6 t)

Stronger than 80% of the trucks in the register — out of 25,241 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Scania R500 have?

The Scania R500 delivers 368 kW.

How much does the Scania R500 weigh?

The unladen weight is 37,575 kg.

What is the gross vehicle weight of the Scania R500?

47,000 kg.

What engine does the Scania R500 have?

8 cylinders, 16,400 cm³ displacement.

How fast does the Scania R500 go?

Top speed is 107 km/h.

What are the dimensions of the Scania R500?

12,000 mm × 2,600 mm.

When was the Scania R500 built?

Production years: 2005-2026.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Used equipment offers
6 current listings for Scania R500 on Hutnia.com.
View offers on Hutnia.com →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare