Scania PA 136C
Built: 1985 · Series: PA 4X2
More machines from model year 1985
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Scania PA 4X2 – the two-axle truck with low cab from the older ranges: P for the short day/distribution cab, 4X2 as the drive formula, six-cylinder of around 11 litres, tractor and flatbed versions
Scania, based in Södertälje, has built trucks since 1902 and for decades has marked the cab form of its ranges with the letter P for the low, short cab without sleeping comfort, typical for distribution, construction and regional transport, as opposed to taller long-haul cabs such as R. The PA 4X2 range in the register comprises two-axle chassis with twelve-metre haulers and tractor units, whose type code carries, besides the cab form, the gearbox and body variant in the model name, for instance as an AS, ZL or ZS version.
Read on 3 more paragraphs
The register lists here 7 versions with a displacement of 11,000 cm³ from six-cylinders, unladen weights of 6,100 to 10,300 kg, a gross vehicle weight of 11,995 to 17,500 kg, lengths of 5,700 to 6,350 mm and widths of 2,500 to 2,550 mm.
The PA 4X2 was among the lighter two-axle chassis of the older Scania ranges, used in regional and distribution transport and for tractor duties with a trailer, before the PGRT generation replaced the programme from 2004.
On a used example from this model-year span, rust on the frame and cab mounts, the condition of clutch and manual gearbox, brakes and the trailer coupling on the tractor versions, and general parts availability for older assemblies all count; parts run through the Scania service network and the used-parts market.
Sources: SpecCodex register, model data: Scania PA 4X2, Scania (manufacturer)
Technical data
Engine
| Cylinders | 6correct |
|---|---|
| Displacement | 11,000 cm³correct |
Dimensions and weights
| Length | 5,700 mmcorrect |
|---|---|
| Width | 2,500 mmcorrect |
| Wheelbase | 3,600 mmcorrect |
| Unladen weight | 6,733 kgcorrect |
| Gross vehicle weight | 11,995 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Scania PA 136C weigh?
The unladen weight is 6,733 kg.
What is the gross vehicle weight of the Scania PA 136C?
11,995 kg.
What engine does the Scania PA 136C have?
6 cylinders, 11,000 cm³ displacement.
What are the dimensions of the Scania PA 136C?
5,700 mm × 2,500 mm.
When was the Scania PA 136C built?
Production years: 1985.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
