Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Scania › P93 M

Scania P93 M

Built: 1990 · Series: P93

More machines from model year 1990

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The P93 M from Scania is part of the P93 series. Production: 1990. The engine delivers 185 kW, has 6 cylinders, with a displacement of 8,480 cm³. The machine is 9,300 mm long and 2,600 mm wide. The unladen weight is 8,100 kg. The gross vehicle weight is 17,500 kg. The P93 series covers 9 models. Rated output within it ranges from 167 to 185 kW; the P93 M sits at the top of that range with 185 kW. Its immediate neighbours are the P93 below it with 184.5 kW. Unladen weight within it ranges from 7,600 to 11,100 kg; here the P93 M sits at the bottom of that range with 8,100 kg. 11893 Scania models across 91 series are on record.

Scania P93 – the P cab of the 3-series: 8.5-litre engine with 167 to 185 kW, cab heights H, M and L, gross weights from 14,300 to 20,500 kg, 9 versions in the register

The Scania P93 belongs to the 3-series, which Scania introduced in 1988 as the successor to the 2-series. The letter P stands for the low forward-control cab for distribution traffic, the digit 9 names the engine family of 8.5 litres, the 3 the series. The suffixes H, M and L give the cab height – H for high, M for medium, L for low – producing combinations such as ML (medium cab, low chassis) or HL.

Read on 3 more paragraphs

The register lists nine versions with 167 to 185 kW from the 8.5-litre engine, unladen weights from 7,600 to 11,100 kg, gross weights from 14,300 to 20,500 kg, lengths from 6,550 to 9,300 mm and widths from 2,350 to 2,600 mm, depending on the cab variant.

The P cab was Scania's basis for distribution and construction-site traffic, while the taller R and T cabs remained reserved for long-haul work; the P93 thus covered the mid-weight segment of the 3-series before the 4-series followed in 1995 with the P94. The short, low cab eased frequent entry and exit in distribution work and improved sightlines onto loading yards and building sites.

On used examples, operating hours and the condition of the injection pump and turbocharger matter, along with clutch and gearbox, rust on the frame and cab floor, and brakes and suspension under full load; parts run through the Scania dealer and workshop network.

Sources: SpecCodex register, model data: Scania P93, Scania (manufacturer)

Technical data

Engine

Power185 kWcorrect
Cylinders6correct
Displacement8,480 cm³correct

Dimensions and weights

Length9,300 mmcorrect
Width2,600 mmcorrect
Unladen weight8,100 kgcorrect
Gross vehicle weight17,500 kgcorrect

Where this model stands

Power-to-weight ratio: 22.8 kW/t (185 kW / 8.1 t)

Stronger than 27% of the trucks in the register — out of 25,241 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Scania P93 M have?

The Scania P93 M delivers 185 kW.

How much does the Scania P93 M weigh?

The unladen weight is 8,100 kg.

What is the gross vehicle weight of the Scania P93 M?

17,500 kg.

What engine does the Scania P93 M have?

6 cylinders, 8,480 cm³ displacement.

What are the dimensions of the Scania P93 M?

9,300 mm × 2,600 mm.

When was the Scania P93 M built?

Production years: 1990.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare