Scania P93 ML
Built: 1988-1991 · Series: P93
More machines from model year 1988
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Scania P93 – the P cab of the 3-series: 8.5-litre engine with 167 to 185 kW, cab heights H, M and L, gross weights from 14,300 to 20,500 kg, 9 versions in the register
The Scania P93 belongs to the 3-series, which Scania introduced in 1988 as the successor to the 2-series. The letter P stands for the low forward-control cab for distribution traffic, the digit 9 names the engine family of 8.5 litres, the 3 the series. The suffixes H, M and L give the cab height – H for high, M for medium, L for low – producing combinations such as ML (medium cab, low chassis) or HL.
Read on 3 more paragraphs
The register lists nine versions with 167 to 185 kW from the 8.5-litre engine, unladen weights from 7,600 to 11,100 kg, gross weights from 14,300 to 20,500 kg, lengths from 6,550 to 9,300 mm and widths from 2,350 to 2,600 mm, depending on the cab variant.
The P cab was Scania's basis for distribution and construction-site traffic, while the taller R and T cabs remained reserved for long-haul work; the P93 thus covered the mid-weight segment of the 3-series before the 4-series followed in 1995 with the P94. The short, low cab eased frequent entry and exit in distribution work and improved sightlines onto loading yards and building sites.
On used examples, operating hours and the condition of the injection pump and turbocharger matter, along with clutch and gearbox, rust on the frame and cab floor, and brakes and suspension under full load; parts run through the Scania dealer and workshop network.
Sources: Kennwerte der Modelle Scania P93, Scania (Hersteller)
Technical data
Engine
| Power | 167 kWcorrect |
|---|---|
| Cylinders | 6correct |
| Displacement | 8,480 cm³correct |
Dimensions and weights
| Length | 7,055 mmcorrect |
|---|---|
| Width | 2,500 mmcorrect |
| Unladen weight | 7,750 kgcorrect |
| Gross vehicle weight | 17,000 kgcorrect |
Drivetrain and chassis
| Gears | 4correct |
|---|
Where this model stands
Power-to-weight ratio: 21.5 kW/t (167 kW / 7.8 t)
Stronger than 22% of the trucks over 7.5 t in the register — out of 25,424 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Scania P93 ML have?
The Scania P93 ML delivers 167 kW.
How much does the Scania P93 ML weigh?
The unladen weight is 7,750 kg.
What is the gross vehicle weight of the Scania P93 ML?
17,000 kg.
What engine does the Scania P93 ML have?
6 cylinders, 8,480 cm³ displacement.
What are the dimensions of the Scania P93 ML?
7,055 mm × 2,500 mm.
When was the Scania P93 ML built?
Production years: 1988-1991.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.