Scania P310 DB4X2MNA
Built: 2005-2007 · Series: P310
More machines from model year 2005
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Scania P310 – the 310 hp truck with low cab: P for the short day/distribution cab, 310 as a direct power rating in hp, six-cylinder of around 9 litres, wheel formulas from 4X2 to 6X4
Scania, based in Södertälje, has built trucks since 1902 and in 2004 introduced the PGRT range with a new type logic in which the number behind the cab letter directly gives the engine output in hp. The letter P stands for the low, short cab without sleeping comfort, typical for distribution and construction-site traffic, as opposed to G and R for taller long-haul cabs. The designation P310 thus denotes a truck with around 310 hp engine output; the wheel formulas recorded in the register range from 4X2 through 6X2 to 6X4, with body variants for flatbed, box body and construction use.
Read on 3 more paragraphs
The register lists here 7 versions with an output of 228 kW, five- to six-cylinders of 8,867 to 9,291 cm³, unladen weights of 11,800 to 27,050 kg, a gross vehicle weight of 19,000 to 30,000 kg, lengths of 8,330 to 12,190 mm and widths of 2,500 to 2,600 mm.
As a medium-heavy truck with a low cab, the P310 was among the most versatile chassis of the PGRT generation, sought by construction firms, municipalities and regional distribution transport, where the compact cab gives good visibility and the 6X4 formula traction on building sites.
On a used example, operating hours and mileage of the six-cylinder, the condition of clutch and gearbox under construction or distribution use, rust on the chassis and body, on the 6X4 versions also the transfer case and rear axles, and brakes and suspension all count; parts run through the Scania service network.
Sources: SpecCodex register, model data: Scania P310, Scania (manufacturer)
Technical data
Engine
| Cylinders | 5correct |
|---|---|
| Displacement | 8,867 cm³correct |
Dimensions and weights
| Length | 9,820 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 5,300 mmcorrect |
| Unladen weight | 13,150 kgcorrect |
| Gross vehicle weight | 19,000 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Scania P310 DB4X2MNA weigh?
The unladen weight is 13,150 kg.
What is the gross vehicle weight of the Scania P310 DB4X2MNA?
19,000 kg.
What engine does the Scania P310 DB4X2MNA have?
5 cylinders, 8,867 cm³ displacement.
What are the dimensions of the Scania P310 DB4X2MNA?
9,820 mm × 2,550 mm.
When was the Scania P310 DB4X2MNA built?
Production years: 2005-2007.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
