Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Scania › P124 › P124 GB

Scania P124 GB

Built: 1998-2002 · Series: P124

More machines from model year 1998

Source: bronline.eu

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the P124 GB, Scania offers a model from the P124 series. Production: 1998-2002. The engine delivers 287 kW, has 6 cylinders, with a displacement of 11,702.5 cm³. The vehicle is 8,170 mm long and 2,545 mm wide. The unladen weight is 11,200 kg. The gross vehicle weight is 32,000 kg. The P124 series covers 8 models. Rated output within it ranges from 265 to 309 kW; the P124 GB sits in the middle of that range with 287 kW. Its immediate neighbours are the P124 LA-A below it with 265 kW and the P124 GB8X2NZ 400 above it with 294 kW. Unladen weight within it ranges from 10,150 to 21,425 kg; here the P124 GB sits at the bottom of that range with 11,200 kg. 11893 Scania models across 91 series are on record.

Scania P124 – distribution and construction chassis of the 4-series with low P-cab and 12-litre engine: 8 versions, 265 to 309 kW, 20.5 to 37 tonnes gross vehicle weight

Scania is a Swedish truck and bus manufacturer headquartered in Södertälje, part of the VW Group since 2000 and today, alongside MAN, under the Traton Group. In the 4-series introduced in 1995, the letter P denotes the lowest and lightest cab, intended for distribution work and construction sites with frequent entry and exit; the number 124 marks the engine class – a twelve-litre six-cylinder. Model designations in the register range from the basic version to all-wheel drive (CA4X4, CB4X4) and low-centre-of-gravity tipper variants (LA-A).

Read on 3 more paragraphs

The register lists 8 versions with 265 to 309 kW from six-cylinder engines of 11,700 to 12,000 cm³. Unladen weights range from 10,150 to 21,425 kg, gross vehicle weights from 20,500 to 37,000 kg, lengths from 6,150 to 12,000 mm and widths from 2,500 to 2,550 mm.

The P-cab makes this range the standard chassis for concrete mixers, tippers, municipal vehicles and cranes, where downward visibility and short entry paths matter more than long-haul comfort; the four-wheel-drive variants CA4X4 and CB4X4 target forestry and off-road construction work. Scania competes in this segment mainly with Volvo, MAN and Mercedes-Benz.

When buying a used P124, check the condition of the body and auxiliary frame, rust on the axles and spring hangers, the condition of the clutch and power take-offs for tipper or crane hydraulics, and on four-wheel-drive versions the transfer case and propeller shafts. Scania maintains a dense parts and service network, so even older P124 chassis remain well supplied.

Sources: SpecCodex register, model data: Scania P124, Scania (manufacturer)

Technical data

Engine

Power287 kWcorrect
Cylinders6correct
Displacement11,702.5 cm³correct

Dimensions and weights

Length8,170 mmcorrect
Width2,545 mmcorrect
Unladen weight11,200 kgcorrect
Gross vehicle weight32,000 kgcorrect

Where this model stands

Power-to-weight ratio: 25.6 kW/t (287 kW / 11.2 t)

Stronger than 50% of the trucks in the register — out of 25,242 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Scania P124 GB have?

The Scania P124 GB delivers 287 kW.

How much does the Scania P124 GB weigh?

The unladen weight is 11,200 kg.

What is the gross vehicle weight of the Scania P124 GB?

32,000 kg.

What engine does the Scania P124 GB have?

6 cylinders, 11,702 cm³ displacement.

What are the dimensions of the Scania P124 GB?

8,170 mm × 2,545 mm.

When was the Scania P124 GB built?

Production years: 1998-2002.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare