Technical register for agricultural, construction and commercial machinery · sourced data
StartTrucks over 7.5 tScania › P124

Scania P124

Built: 2003-2003 · Series: P124

More machines from model year 2003

Wikimedia Commons · CC BY-SA 4.0 · Gunnar Creutz · Dateiseite

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Scania P124 is a machine built by Scania. Production: 2003. The engine delivers 309 kW, has 6 cylinders, with a displacement of 11,705 cm³. The machine is 7,550 mm long and 2,550 mm wide. The unladen weight is 13,100 kg. The gross vehicle weight is 20,500 kg. Rated output across the Scania range ranges from 69 to 566 kW; the P124 sits in the middle of that range with 309 kW. Its immediate neighbours are the 12 C-6X2 below it with 308.5 kW and the 124 GB-8X4/194+396+136 above it with 310 kW. 7586 Scania models across 18 series are on record. The model is listed under Trucks over 7.5 t. 8 verified figures from 1 source are on file.

Technical data

Engine

Power309 kWcorrect
Cylinders6correct
Displacement11,705 cm³correct

Dimensions and weights

Length7,550 mmcorrect
Width2,550 mmcorrect
Unladen weight13,100 kgcorrect
Gross vehicle weight20,500 kgcorrect

Where this model stands

Power-to-weight ratio: 23.6 kW/t (309 kW / 13.1 t)

Stronger than 56% of the trucks over 7.5 t in the register — out of 25,425 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Scania P124 have?

The Scania P124 delivers 309 kW.

How much does the Scania P124 weigh?

The unladen weight is 13,100 kg.

What is the gross vehicle weight of the Scania P124?

20,500 kg.

What engine does the Scania P124 have?

6 cylinders, 11,705 cm³ displacement.

What are the dimensions of the Scania P124?

7,550 mm × 2,550 mm.

When was the Scania P124 built?

Production years: 2003.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare