Scania L50 SUPER
Built: 1972-1972 · Series: L50
More machines from model year 1972
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Scania L50 – bonneted L-series truck from the 1960s: 95 kW four-cylinder of 5.2-litre displacement, 11,380 to 12,000 kg gross weight
The L-series was Scania's bonneted range of the 1950s to 1970s, with the engine hood ahead of the cab instead of the later cab-over layout. The L50 was one of the smaller models in this range, with a four-cylinder diesel of 5.2-litre displacement and 95 kW output. Suffixes such as S on some versions, and figure combinations like 54-116-540 in the register's model names, point to the wheelbase, gearbox or rear-axle ratio of the particular version.
Read on 3 more paragraphs
The register lists here 4 versions with an output of 95 kW from the 5,200 cm³ four-cylinder, unladen weights from 4,850 to 5,350 kg, gross weights from 11,380 to 12,000 kg, lengths from 6,300 to 6,900 mm and widths from 2,230 to 2,500 mm.
In the 1960s, the L50 was a medium-payload truck for distribution traffic and municipal duties, competing directly with Volvo's bonneted L-series and with Mercedes-Benz. The bonneted layout eased engine access for servicing, at the cost of load length compared with a cab-over of the same overall length.
On a used L50, the key checks are corrosion on the frame and cab mounting, the condition of the mechanical injection pump and the braking system, and leaks from the engine and gearbox. Parts for the four-cylinder diesel of this generation are today mostly available through specialist vintage Scania dealers.
Sources: Kennwerte der Modelle Scania L50, Scania (Hersteller)
Technical data
Engine
| Cylinders | 4correct |
|---|
Dimensions and weights
| Length | 6,700 mmcorrect |
|---|---|
| Width | 2,370 mmcorrect |
| Wheelbase | 4,200 mmcorrect |
| Unladen weight | 5,070 kgcorrect |
| Gross vehicle weight | 12,000 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Scania L50 SUPER weigh?
The unladen weight is 5,070 kg.
What is the gross vehicle weight of the Scania L50 SUPER?
12,000 kg.
What engine does the Scania L50 SUPER have?
4 cylinders.
What are the dimensions of the Scania L50 SUPER?
6,700 mm × 2,370 mm.
When was the Scania L50 SUPER built?
Production years: 1972.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.