Scania 270 DB 6X2*4 HNA
Built: 2005-2007 · Series: P
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Scania P — the low cab for distribution and construction
P is Scania's lowest cab step. The entry sits lower than on G, R and S, and so does the roof. That is exactly its purpose: anyone climbing in and out twenty times a day saves a step at every stop. Urban distribution, municipal bodies, construction vehicles — that is where the P works.
Read on 4 more paragraphs
The second property is clearance height. Low gateways, underground car parks, hall entrances and tight construction sites impose a limit that a long-haul cab exceeds. Anyone who regularly has to pass under structures chooses the P not to save money but because the bigger house does not fit.
As with every Scania model, the number after the letter is engine output in horsepower, not weight. A P 280 has 280 hp. Gross vehicle weight does not appear in the designation — it follows from the axle configuration and body and must be read from the papers.
For used purchases the cab variant is worth a look. The P comes with different roof heights and as a short, day or sleeper cab. Two vehicles, both P 280, can differ markedly inside. Anyone needing the vehicle for long days should check cab length, not just the designation.
One closing point of orientation: P and G overlap in application more than the letters suggest. The G offers more headroom across a similar field of work. Anyone torn between them is usually deciding entry height against interior space — not power.
Sources: Scania Group: P-series, Scania UK
Technical data
Engine
| Cylinders | 5correct |
|---|---|
| Displacement | 8,867 cm³correct |
Dimensions and weights
| Length | 10,140 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 6,460 mmcorrect |
| Unladen weight | 14,320 kgcorrect |
| Gross vehicle weight | 28,000 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|
Frequently asked questions
How much does the Scania 270 DB 6X2*4 HNA weigh?
The unladen weight is 14,320 kg.
What is the gross vehicle weight of the Scania 270 DB 6X2*4 HNA?
28,000 kg.
What engine does the Scania 270 DB 6X2*4 HNA have?
5 cylinders, 8,867 cm³ displacement.
What are the dimensions of the Scania 270 DB 6X2*4 HNA?
10,140 mm × 2,550 mm.
When was the Scania 270 DB 6X2*4 HNA built?
Production years: 2005-2007.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
(11,12) C-6X2
(11,12) C-6X4
(11,12) C-8X4
(11,12) D-6X2
(11,12) L-6X2
(11,12) L-6X4
(11,12) L-8X2
(11,12)L-8X4
,G,R-SERIEN, R620
11 CB-A-ASA10-6X2/390+135
11 CB-A-ASA10-6X2/390+136
11 CB-SCAPP-6X2/390+132
Sources: [1]
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.