Scania 85S – specifications
Built: 1972 · Series: L
Data for the version built 1972 · Data origin: Official register · sources
More machines from model year 1972
Scania L – two eras of one designation: the classic L types of the 1970s/80s (L80 to L140) and the low-entry city range introduced in 2017 with diesel, gas and electric drive, 88 to 251 kW
At Scania, the L designation refers to two different eras. In the 1970s and 1980s, L (and the LS variant) denoted the tractor units and chassis of the then 80, 110 and 140 range with inline six-cylinder or V8 engines, as shown on the model plates in the register under designations such as 110 42, 140 46 or 80 S 42. In 2016/2017 Scania reintroduced the name for a standalone low-entry range with a deeply lowered cab for city transport, refuse collection and construction-site logistics, available with a classic diesel engine, natural gas/biomethane or a fully electric drivetrain.
Read on 3 more paragraphs
The register lists 99 versions here with engines from 88 to 251 kW from 5,200 to 14,400 cm³ displacement with 4 to 8 cylinders, kerb weights from 4,035 to 17,100 kg, gross weights from 11,000 to 28,000 kg and fuel types ranging from diesel through natural gas/biomethane to electric.
The L range thus represents two entirely different vehicle concepts under one letter: the classic long-haul truck from the era before the 3-series, and the modern low-entry distribution truck for city centres.
On the classic L types, what counts is frame and cab rust, the condition of the clutch and manual gearbox, and spare parts supply through specialists in vintage trucks; on the modern low-entry models, battery condition and charging electronics on the electric versions, the gas system and tank pressure on CNG/biomethane, and the usual check of brakes, axles and gearbox.
Sources: SpecCodex register, model data: Scania L, Scania (manufacturer)
Technical data
Engine
| Power | 140 kWcorrect |
|---|---|
| Cylinders | 6correct |
| Displacement | 7,800 cm³correct |
Dimensions and weights
| Length | 8,030 mmcorrect |
|---|---|
| Width | 2,500 mmcorrect |
| Unladen weight | 8,200 kgcorrect |
Frequently asked questions
How much power does the Scania 85S have?
The Scania 85S delivers 140 kW.
How much does the Scania 85S weigh?
The unladen weight is 8,200 kg.
What engine does the Scania 85S have?
6 cylinders, 7,800 cm³ displacement.
What are the dimensions of the Scania 85S?
8,030 mm × 2,500 mm.
When was the Scania 85S built?
Production years: 1972.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
,P,G,R S-SERIEN,R500
110 42
110 46
110 S 42
110 S 46/4600
110 S46
110S
110S42
111 46
111 S38
111S50-46
140 42
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · Data sources and cross-checks
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
