Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Samro › CD 19 TJ

Samro CD 19 TJ

Built: 2011-2011 · Series: CD

More machines from model year 2011

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The CD 19 TJ comes from Samro. Production: 2011. The machine is 2,550 mm wide. The unladen weight is 5,500 kg. Top speed is 100 km/h. The gross vehicle weight is 19,000 kg. Unladen weight across the Samro range ranges from 2,990 to 42,000 kg; the CD 19 TJ sits at the bottom of that range with 5,500 kg. Its immediate neighbours are the SU21WHVE below it with 5,400 kg and the RE330DVP above it with 5,520 kg. 132 Samro models are on record. The model is listed under Trailers. 6 verified figures from 1 source are on file.

Samro CD – French bulk-goods semi-trailers: the CD 18/19 range, unladen weight up to 7 t, gross weight up to 20 t, lengths up to 10.4 m

Samro is a French semi-trailer manufacturer. The CD range bundles the CD 18 and CD 19 versions with the suffixes MH, MHPE, WJPE and TJ, denoting different equipment and body variants of the same basic chassis. The ratio of unladen to gross weight points to tipping or bulk-goods bodies intended for agricultural and construction haulage.

Read on 3 more paragraphs

The register lists 5 versions with unladen weights from 3,200 to 7,020 kg at a gross weight of 12,000 to 20,000 kg. Lengths range from 6,390 to 10,410 mm, widths from 2,510 to 2,600 mm.

Trailers of this size are widespread in France above all in the transport of grain, sugar beet and other agricultural bulk goods as well as building materials, often working with local co-operatives and hauliers. Samro sits in the same market segment as other French and Belgian makers of tipping and bulk-goods semi-trailers, such as Legras or Rolland, which likewise specialise in agricultural bulk haulage.

When buying used, the key checks are the condition of the tipping ram or sideboards, the seal on the load floor, corrosion on the frame and axle suspension, and the operation of the air suspension and braking system including ABS/EBS. The kingpin, landing gear and lighting system should also be checked; spare parts mostly run through French commercial-vehicle dealers.

Sources: Kennwerte der Modelle Samro CD

Technical data

Dimensions and weights

Width2,550 mmcorrect
Unladen weight5,500 kgcorrect
Gross vehicle weight19,000 kgcorrect

Drivetrain and chassis

Top speed100 km/hcorrect

Frequently asked questions

How much does the Samro CD 19 TJ weigh?

The unladen weight is 5,500 kg.

What is the gross vehicle weight of the Samro CD 19 TJ?

19,000 kg.

Up to what speed is the Samro CD 19 TJ approved?

Approved up to 100 km/h.

When was the Samro CD 19 TJ built?

Production years: 2011.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare