SAME LASER 90 (DT)
Built: 1985–1991 · Series: LASER-Baureihe
More machines from model year 1985
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
SAME LASER range – four-wheel-drive tractors from Treviglio: LASER 90 (DT) and LASER 100 (DT), four- and five-cylinder diesels of 4,154 to 5,193 cm³, 65 to 72 kW, unladen weights from 3,860 to 3,940 kg
The LASER range in the register comprises the LASER 90 (DT) and the LASER 100 (DT); the DT suffix at SAME stands for Doppia Trazione, four-wheel drive, fitted to both models here. The range was built at the parent plant in Treviglio near Bergamo, home of the brand founded in 1942 and today part of the SAME Deutz-Fahr group, in the mid-to-upper power class of the classic SAME four-cylinder tractors.
Read on 3 more paragraphs
The register lists here 2 versions with 64.7 to 72.1 kW from four- and five-cylinders of 4,154 to 5,193 cm³ at 2,200 to 2,270 revolutions per minute and a torque of 303 to 328 Nm. Unladen weights run from 3,860 to 3,940 kg, lengths from 3,715 to 3,885 mm, widths from 1,957 to 2,096 mm and heights from 2,676 to 2,702 mm.
At roughly 88 to 98 hp with four-wheel drive as standard, the LASER range covers the mid-to-upper segment of Italian multi-purpose tractors used for tillage, transport and running heavier mounted implements on mid-sized to larger farms.
On a used LASER, operating hours and the condition of the diesel, the function of clutch and shuttle, the state of the four-wheel drive including the front axle gearbox, tightness of the hydraulics, and corrosion on cab, mudguards and frame matter; parts run through the SAME Deutz-Fahr group network.
Sources: SpecCodex register, model data: SAME LASER, SAME (SAME Deutz-Fahr Group, Hersteller)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 88 hp (64.7 kW)correct |
| Rated speed | 2,270 rpmcorrect |
| Torque | 303 Nmcorrect |
| Speed at max. torque | 1,370 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 4,154 cm³correct |
| Bore | 105 mmcorrect |
| Stroke | 120 mmcorrect |
| Compression ratio | 17correct |
| Cooling | air-cooledcorrect |
Dimensions and weights
| Length | 3,715 mmcorrect |
|---|---|
| Width | 2,096 mmcorrect |
| Height | 2,676 mmcorrect |
| Wheelbase | 2,467 mmcorrect |
| Ground clearance | 527 mmcorrect |
| Unladen weight | 3,860 kgcorrect |
Drivetrain and chassis
| Drive | rear- or four-wheel drivecorrect |
|---|---|
| Gearbox | 24 V/12 R and 20 V/12 Rcorrect |
| Front tyres | 7.50-18 ASF (DT: 16.9-24 AS)correct |
| Rear tyres | 18.4-34 AScorrect |
| Top speed | 30 km/hcorrect |
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|
Where this model stands
Power-to-weight ratio: 16.8 kW/t (65 kW / 3.9 t)
Power class: Universal (40–100 hp)
Stronger than 60% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the SAME LASER 90 (DT) have?
The SAME LASER 90 (DT) delivers 88 hp.
How much does the SAME LASER 90 (DT) weigh?
The unladen weight is 3,860 kg.
What engine does the SAME LASER 90 (DT) have?
4 cylinders, 4,154 cm³ displacement, Diesel.
How fast does the SAME LASER 90 (DT) go?
Top speed is 30 km/h.
What are the dimensions of the SAME LASER 90 (DT)?
3,715 mm × 2,096 mm × 2,676 mm.
When was the SAME LASER 90 (DT) built?
Production years: 1985–1991.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.