Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › SAME › LASER 100 (DT)

SAME LASER 100 (DT)

Built: 1986–1991 · Series: LASER-Baureihe

More machines from model year 1986

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The SAME LASER 100 (DT) belongs to the LASER series. Production: 1986–1991. The engine delivers 98 hp (72.1 kW), has 5 cylinders, with a displacement of 5,193 cm³. Torque is 328 Nm. Rated speed is 2,200 rpm. The machine is 3,885 mm long, 1,957 mm wide and 2,702 mm high. The unladen weight is 3,940 kg. The wheelbase measures 2,617 mm. Ground clearance is 527 mm. Top speed is 30 km/h. Transmission: 24 V/12 R and 20 V/12 R. The engine is air-cooled. Tyres: front 9.00-16 ASF (DT: 14.9-28 AS), rear 16.9-38 AS. The fuel is diesel. The bore measures 105 mm. The stroke is 120 mm. The compression ratio is 17:1. Maximum torque is reached at 1,424 rpm. Construction: unit construction (no separate frame). Injection pressure is 215 bar. Rated output across the SAME range ranges from 12.5 to 269 hp; the LASER 100 (DT) sits in the lower part of that range with 98 hp. Its immediate neighbours are the Virtus 100 below it with 95 hp and the SILVER 100.4 DT above it with 100 hp. Rated output across the SAME range ranges from 9.2 to 198 kW; here the LASER 100 (DT) sits in the lower part of that range with 72.1 kW. 265 SAME models across 29 series are on record.

SAME LASER range – four-wheel-drive tractors from Treviglio: LASER 90 (DT) and LASER 100 (DT), four- and five-cylinder diesels of 4,154 to 5,193 cm³, 65 to 72 kW, unladen weights from 3,860 to 3,940 kg

The LASER range in the register comprises the LASER 90 (DT) and the LASER 100 (DT); the DT suffix at SAME stands for Doppia Trazione, four-wheel drive, fitted to both models here. The range was built at the parent plant in Treviglio near Bergamo, home of the brand founded in 1942 and today part of the SAME Deutz-Fahr group, in the mid-to-upper power class of the classic SAME four-cylinder tractors.

Read on 3 more paragraphs

The register lists here 2 versions with 64.7 to 72.1 kW from four- and five-cylinders of 4,154 to 5,193 cm³ at 2,200 to 2,270 revolutions per minute and a torque of 303 to 328 Nm. Unladen weights run from 3,860 to 3,940 kg, lengths from 3,715 to 3,885 mm, widths from 1,957 to 2,096 mm and heights from 2,676 to 2,702 mm.

At roughly 88 to 98 hp with four-wheel drive as standard, the LASER range covers the mid-to-upper segment of Italian multi-purpose tractors used for tillage, transport and running heavier mounted implements on mid-sized to larger farms.

On a used LASER, operating hours and the condition of the diesel, the function of clutch and shuttle, the state of the four-wheel drive including the front axle gearbox, tightness of the hydraulics, and corrosion on cab, mudguards and frame matter; parts run through the SAME Deutz-Fahr group network.

Sources: SpecCodex register, model data: SAME LASER, SAME (SAME Deutz-Fahr Group, Hersteller)

Technical data

Engine

Fueldieselcorrect
Power98 hp (72.1 kW)correct
Rated speed2,200 rpmcorrect
Torque328 Nmcorrect
Speed at max. torque1,424 rpmcorrect
Cylinders5correct
Displacement5,193 cm³correct
Bore105 mmcorrect
Stroke120 mmcorrect
Compression ratio17correct
Injection pressure215 barcorrect
Coolingair-cooledcorrect

Dimensions and weights

Length3,885 mmcorrect
Width1,957 mmcorrect
Height2,702 mmcorrect
Wheelbase2,617 mmcorrect
Ground clearance527 mmcorrect
Unladen weight3,940 kgcorrect

Drivetrain and chassis

Driverear- or four-wheel drivecorrect
Gearbox24 V/12 R and 20 V/12 Rcorrect
Front tyres9.00-16 ASF (DT: 14.9-28 AS)correct
Rear tyres16.9-38 AScorrect
Top speed30 km/hcorrect

Origin and approval

Constructionunit construction (no separate frame)correct

Where this model stands

Power-to-weight ratio: 18.3 kW/t (72 kW / 3.9 t)

Power class: Universal (40–100 hp)

Stronger than 65% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the SAME LASER 100 (DT) have?

The SAME LASER 100 (DT) delivers 98 hp.

How much does the SAME LASER 100 (DT) weigh?

The unladen weight is 3,940 kg.

What engine does the SAME LASER 100 (DT) have?

5 cylinders, 5,193 cm³ displacement, Diesel.

How fast does the SAME LASER 100 (DT) go?

Top speed is 30 km/h.

What are the dimensions of the SAME LASER 100 (DT)?

3,885 mm × 1,957 mm × 2,702 mm.

When was the SAME LASER 100 (DT) built?

Production years: 1986–1991.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 25 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare