Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › SAME Deutz Fahr › Agrotrac - Reihe › Agrotrac 110

SAME Deutz Fahr Agrotrac 110

Built: 2004 · Series: Agrotrac - Reihe

More machines from model year 2004

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the Agrotrac 110, SAME Deutz Fahr offers a model from the Agrotrac - Reihe series. Production: 2004. The engine delivers 101 hp (74 kW), has 6 cylinders, with a displacement of 6,000 cm³. Torque is 390 Nm. Rated speed is 2,300 rpm. The machine is 4,102 mm long, 2,082 mm wide and 2,687 mm high. The unladen weight is 4,320 kg. The wheelbase measures 2,633 mm. Ground clearance is 450 mm. Top speed is 38 km/h. Transmission: 15V / 15R. The engine is Flüssigkeitskühlung. Tyres: rear 16.9 R 34. The fuel is diesel. The bore measures 105 mm. The stroke is 115.5 mm. Maximum torque is reached at 1,400 rpm. The Agrotrac - Reihe series covers 9 models. Rated output within it ranges from 96 to 171 hp; the Agrotrac 110 sits at the bottom of that range with 101 hp. Its immediate neighbours are the Agrotrac 100 below it with 96 hp and the Agrotrac 115 above it with 116 hp. Unladen weight within it ranges from 4,055 to 5,700 kg; here the Agrotrac 110 sits in the lower part of that range with 4,320 kg. 200 SAME Deutz Fahr models across 35 series are on record.

Deutz-Fahr Agrotrac: extra ground clearance for special cases, 96 to 171 hp, four- and six-cylinder diesels, technically close to the Agrotron base

In the 2000s, the Agrotrac series added tractors tailored to particular working conditions to the SDF line-up in the mid-to-upper power segment, technically close to the contemporary Agrotron base.

Read on 4 more paragraphs

The register lists 9 live models, from the Agrotrac 100 to the Agrotrac 620, built around 2004 and 2009. Output ranges from 70.5 to 126 kW, or 96 to 171 hp, weight from 4,055 to 5,700 kg, displacement from 4,000 to 6,000 cm3, across four- and six-cylinder engines.

Spanning 96 to 171 hp, the Agrotrac sat between the Agroplus mid-range and the large Agrotron flagships in SDF's line-up of the time.

Anyone finding an Agrotrac in the register should ask the dealer about exact specification, since different chassis and cab variants were offered within the series for different applications.

When buying a used Agrotrac, besides the specification question, clutch and gearbox condition, the tightness of the lift hydraulics, and – on the six-cylinder models – the injection system and turbocharger all matter; rust on the chassis and mudguards after years of special-duty use is common too. Parts run through the SAME Deutz-Fahr group. PTO and lift correspond in this power class to ISO 730 Category II to III, at 540 or 1,000 rpm. Because the Agrotrac is technically closely related to the contemporary Agrotron base, many engine and drivetrain parts are interchangeable between the two series.

Sources: SpecCodex register, model data: Deutz-Fahr Agrotrac

Technical data

Engine

Fueldieselcorrect
Power101 hp (74 kW)correct
Rated speed2,300 rpmcorrect
Torque390 Nmcorrect
Speed at max. torque1,400 rpmcorrect
Cylinders6correct
Displacement6,000 cm³correct
Bore105 mmcorrect
Stroke115.5 mmcorrect
Coolingliquid-cooledcorrect

Dimensions and weights

Length4,102 mmcorrect
Width2,082 mmcorrect
Height2,687 mmcorrect
Wheelbase2,633 mmcorrect
Ground clearance450 mmcorrect
Unladen weight4,320 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Gearbox15V / 15Rcorrect
Rear tyres16.9 R 34correct
Top speed38 km/hcorrect

Where this model stands

Power-to-weight ratio: 17.1 kW/t (74 kW / 4.3 t)

Power class: Large (100–180 hp)

Stronger than 66% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the SAME Deutz Fahr Agrotrac 110 have?

The SAME Deutz Fahr Agrotrac 110 delivers 101 hp.

How much does the SAME Deutz Fahr Agrotrac 110 weigh?

The unladen weight is 4,320 kg.

What engine does the SAME Deutz Fahr Agrotrac 110 have?

6 cylinders, 6,000 cm³ displacement, Diesel.

How fast does the SAME Deutz Fahr Agrotrac 110 go?

Top speed is 38 km/h.

What are the dimensions of the SAME Deutz Fahr Agrotrac 110?

4,102 mm × 2,082 mm × 2,687 mm.

When was the SAME Deutz Fahr Agrotrac 110 built?

Production years: 2004.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare