SAME Argon Stufe III B 80
Built: 2017 · Series: Argon Stufe III B
More machines from model year 2017
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
SAME Argon Stufe III B 80 (2017): water-cooled three-cylinder standard tractor with 55 kW output, a 2,500 kg lift capacity and Stage III B emissions
SAME is an Italian tractor manufacturer with a long tradition of building farm tractors. The Argon Stufe III B 80 was built in 2017, and its name already carries the European emissions standard, Stage III B, under which it was type-approved.
Read on 3 more paragraphs
The water-cooled three-cylinder diesel engine displaces 2,887 cm³ and delivers 55 kW at 2,000 rpm, equivalent to 75 horsepower. With a weight of 3,000 kg, a wheelbase of 2,100 mm, a width of 1,782 mm and a hydraulic lift capacity of 2,500 kg, the Argon 80 was a versatile standard tractor in the mid power class.
Stage III B emissions were an important intermediate step for mobile machinery with combustion engines on the way to the stricter Stage IV and V limits, and typically already required exhaust after-treatment such as a particulate filter. A rear lift capacity of 2,500 kg allows medium-weight implements such as ploughs or disc harrows to be raised safely.
When buying a used Argon Stufe III B 80, the exhaust after-treatment, particularly any fitted particulate filter, should be checked for function, since repairing these components can be costly. The hydraulic pump and lift cylinders also deserve a check under full load to confirm the stated lift capacity. A test drive with an implement attached also shows how reliably the exhaust after-treatment electronics behave under real field conditions rather than only at idle.
Sources: SpecCodex-Register: Kennwerte des Modells Argon Stufe III B 80
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 75 hp (55 kW)correct |
| Rated speed | 2,000 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 2,887 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 3,860 mmcorrect |
|---|---|
| Width | 1,782 mmcorrect |
| Height | 2,473 mmcorrect |
| Wheelbase | 2,100 mmcorrect |
| Unladen weight | 3,000 kgcorrect |
Drivetrain and chassis
| Front tyres | 320/85 R20”correct |
|---|---|
| Rear tyres | 420/85 R28”correct |
Working data
| Lifting capacity | 2,500 kgcorrect |
|---|
Where this model stands
Power-to-weight ratio: 18.3 kW/t (55 kW / 3 t)
Power class: Universal (40–100 hp)
Stronger than 51% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the SAME Argon Stufe III B 80 have?
The SAME Argon Stufe III B 80 delivers 75 hp.
How much does the SAME Argon Stufe III B 80 weigh?
The unladen weight is 3,000 kg.
What engine does the SAME Argon Stufe III B 80 have?
3 cylinders, 2,887 cm³ displacement, Diesel.
How much does the rear linkage of the SAME Argon Stufe III B 80 lift?
The rear linkage lifts 2,500 kg.
What are the dimensions of the SAME Argon Stufe III B 80?
3,860 mm × 1,782 mm × 2,473 mm.
When was the SAME Argon Stufe III B 80 built?
Production years: 2017.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 16 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.