Royen S632T/2
Built: 1990 · Series: Other models
More machines from model year 1990
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Royen – other models: the collective page of the Belgian special-haulage manufacturer from Soumagne outside the named ranges, machine and timber transport, unladen weight 3,240 to 14,520 kg, gross weight up to 45,000 kg
Royen is a Belgian manufacturer of trailers and semi-trailers for special haulage, based in Soumagne near Liège and specialising in the transport of construction machinery, timber and building materials; the MultiWay platform and forestry trailers are the core products of the business. This page gathers the Royen models outside the named ranges, from low-loaders in the SZ and RT series to platform and special trailers for forestry and machine transport.
Read on 4 more paragraphs
The register lists 14 versions here with unladen weights from 3,240 to 14,520 kg and gross weights from 18,000 to 45,000 kg; lengths run from 8,640 to 14,040 mm, widths from 2,530 to 2,600 mm.
The focus on machine and timber transport makes Royen a niche supplier for forestry businesses, plant hire companies and earthworks contractors in Belgium and neighbouring countries, where low load floors and rugged ramp constructions for tracked vehicles and forestry machines are in demand.
With gross weights of up to 45 tonnes, Royen's low-loaders and platform trailers fall into EU class O4, which requires an air brake system; towing requires driving licence category CE. Low-loaders for tracked vehicles usually run on tandem or tridem axles with hydraulic steering of the rear axle group, which eases manoeuvring with a long wheelbase on narrow forest tracks and building sites.
On used Royen low-loaders, check the ramps, winches and their locks, the condition of the load-floor timber or steel plate, axles and brakes, and – on forestry trailers – the stakes and crane mounting; since machine transport creates high point loads, the frame around the axle mounts deserves particular attention.
Sources: SpecCodex register, model data: Royen
Technical data
Dimensions and weights
| Length | 13,600 mmcorrect |
|---|---|
| Width | 2,530 mmcorrect |
| Wheelbase | 9,050 mmcorrect |
| Unladen weight | 7,160 kgcorrect |
| Gross vehicle weight | 32,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Royen S632T/2 weigh?
The unladen weight is 7,160 kg.
What is the gross vehicle weight of the Royen S632T/2?
32,000 kg.
Up to what speed is the Royen S632T/2 approved?
Approved up to 100 km/h.
What are the dimensions of the Royen S632T/2?
13,600 mm × 2,530 mm.
When was the Royen S632T/2 built?
Production years: 1990.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.