Roodberg MCS 4536 TRAILER 2
Built: 2019-2024 · Series: MCS
More machines from model year 2019
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Roodberg MCS – exceptionally heavy transport module range from the Dutch manufacturer: 9 versions, unladen weight from 15,460 to 53,100 kg, gross weight from 39,000 to 53,500 kg
Roodberg is a Dutch manufacturer based in Stadskanaal, known chiefly for articulated dump trucks and heavy-duty vehicles for construction and mining use. The MCS range brings together a group of exceptionally heavy transport modules in the register, whose type designation consists of a four-digit base number plus a suffix for the individual version.
Read on 3 more paragraphs
The register lists here 9 versions with unladen weights from 15,460 to 53,100 kg and a gross weight from 39,000 to 53,500 kg.
With unladen weights of over 53 tonnes, the range lies far beyond what ordinary road semi-trailers reach, and clearly belongs to the heavy-haulage and mining sector, where transport modules are used as part of larger vehicle combinations or for site traffic on paved works grounds. The narrow gap between unladen and gross weight on the heaviest versions shows that a considerable share of the permitted mass is already taken up by the module itself.
When buying a used transport module of this scale, the condition of the frame, axles and wheel bearings under the constantly high base load, the braking system, and all connection and coupling points between modules matter most. Spare parts for such specialised vehicles are as a rule only available directly from Roodberg. It is also worth checking the complete service history and the validity of inspections and technical tests.
Sources: SpecCodex register, model data: Roodberg MCS, Roodberg (manufacturer)
Technical data
Dimensions and weights
| Wheelbase | 1,376 mmcorrect |
|---|---|
| Unladen weight | 45,580 kgcorrect |
| Gross vehicle weight | 53,500 kgcorrect |
Drivetrain and chassis
| Wheels | 16correct |
|---|---|
| Top speed | 80 km/hcorrect |
Frequently asked questions
How much does the Roodberg MCS 4536 TRAILER 2 weigh?
The unladen weight is 45,580 kg.
What is the gross vehicle weight of the Roodberg MCS 4536 TRAILER 2?
53,500 kg.
Up to what speed is the Roodberg MCS 4536 TRAILER 2 approved?
Approved up to 80 km/h.
When was the Roodberg MCS 4536 TRAILER 2 built?
Production years: 2019-2024.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
MCS 3326 TRAILER 1
MCS 3326 TRAILER 2
MCS 3326 TRAILER 3
MCS 4030 TRAILER 1
MCS 4030 TRAILER 2
MCS 4030 TRAILER 3
MCS 4536 TRAILER 1
MCS 4536 TRAILER 3
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
