Rino SV4503
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Rino – other models: the collective page of Dutch low-loader trailers outside the named ranges, semi low-loaders with sliding curtains, 24 to 48 tonnes gross weight, up to 17.55 metres in length
This page gathers the Rino trailers the register could not assign to a named range. Rino builds heavy low-loader and semi-low-loader trailers, described in the Dutch register in some cases directly as "semi dieplader met schuifzeilen" – a semi low-loader with sliding curtains. Type designations such as PL4803 KS, SV4503 or MP 45 03 combine letters for body and curtain variant with numbers for axle count and payload class.
Read on 3 more paragraphs
The register lists here 22 versions with unladen weights from 4,810 to 10,960 kg, gross weights from 24,000 to 48,000 kg, lengths from 6,740 to 17,550 mm and widths from 2,540 to 2,700 mm.
Low-loaders of this size carry construction machinery, agricultural equipment and special loads that would exceed the load height of a normal semi-trailer; the sliding curtain allows side loading by crane or forklift without removing the curtain entirely. Some versions additionally feature an extendable frame that adapts the load length to the cargo, for instance turbine blades or bridge girders.
On used low-loaders, the condition of frame and loading deck, ramps and locks, axles, steering axles and brakes, and the condition and function of the sliding curtain and lashing straps all count; parts run through specialist low-loader workshops. The hydraulic system for a hydraulically lowered bed, where fitted, should also be tested for leaks and even lowering on both sides.
Sources: SpecCodex register, model data: Rino (weitere Modelle), Zulassungsdaten RDW (Niederlande)
Technical data
Dimensions and weights
| Length | 13,600 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 9,490 mmcorrect |
| Unladen weight | 9,500 kgcorrect |
| Gross vehicle weight | 45,000 kgcorrect |
Drivetrain and chassis
| Wheels | 12correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Rino SV4503 weigh?
The unladen weight is 9,500 kg.
What is the gross vehicle weight of the Rino SV4503?
45,000 kg.
Up to what speed is the Rino SV4503 approved?
Approved up to 100 km/h.
What are the dimensions of the Rino SV4503?
13,600 mm × 2,550 mm.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
24AH03
BT4803
CT 28 01 KS
CT 2801KS
CT2801 KS
CT2801KS
CT38 02 KS
ME4503
MP 42 03
MP 45 03
MP4503
PE 45 03 ST
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
