Rimor ARF39P3
Built: 2003 · Series: Other models
More machines from model year 2003
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Rimor ARF39P3: Italian motorhome with a four-cylinder engine, 3,500 kg maximum gross weight, a 3.96 m wheelbase and a width of 2.22 m
Rimor is an Italian motorhome manufacturer based in San Felice sul Panaro in the province of Modena, building habitation bodies on light chassis. The chassis manufacturer is not given in the register, and the model carries the designation ARF39P3. The registration is recorded for the year 2003.
Read on 3 more paragraphs
The engine has four cylinders. With a maximum gross weight of 3,500 kg and an unladen weight of 2,900 kg, the payload comes to around 600 kg. Wheelbase is 3.96 m and width 2.22 m. An unladen weight of 2,900 kg on such a short wheelbase is typical of a motorhome with a habitation body, furniture and fittings, and shows that a large share of the permitted gross weight is already taken up by the body itself.
At a maximum gross weight of 3,500 kg, the vehicle falls into EU class N1 and can be driven in most European countries on a category B licence. On motorhomes in this weight class, the payload of around 600 kg has to be budgeted carefully for water, gas, luggage and passengers, since the body's own weight leaves little margin. A tight remaining payload is the norm for this type of vehicle, not a peculiarity of this particular example.
Buying a used motorhome of this size and age means checking above all for moisture in the habitation body, especially around windows, the roof hatch and the join between body and chassis, since water ingress can rot the floor and furniture structure from the inside without being visible from outside. On top of that come the usual chassis checks: brakes, tyre age and corrosion on the frame.
Sources: SpecCodex-Register: Kennwerte des Modells Rimor ARF39P3
Technical data
Engine
| Cylinders | 4correct |
|---|
Dimensions and weights
| Width | 2,220 mmcorrect |
|---|---|
| Wheelbase | 3,960 mmcorrect |
| Unladen weight | 2,900 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Rimor ARF39P3 weigh?
The unladen weight is 2,900 kg.
What is the gross vehicle weight of the Rimor ARF39P3?
3,500 kg.
What engine does the Rimor ARF39P3 have?
4 cylinders.
When was the Rimor ARF39P3 built?
Production years: 2003.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: [1]
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
