Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Renault › 175-74 TZ

Renault 175-74 TZ

Built: 11/1989–4/1992 · Series: TZ-Baureihe

More machines from model year 1989

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The TZ series from Renault includes the 175-74 TZ. Production: 11/1989–4/1992. The engine delivers 165 hp (121.4 kW), has 6 cylinders, with a displacement of 6,234 cm³. Torque is 593 Nm. Rated speed is 2,350 rpm. The machine is 4,863 mm long, 2,228 mm wide and 3,120 mm high. The unladen weight is 6,220 kg. The wheelbase measures 2,760 mm. Ground clearance is 400 mm. Top speed is 30 km/h. The tank holds 225 litres. Transmission: 24 V/8 R. The engine is water-cooled. Tyres: front 16.9 R 28 AS, rear 20.8 R 38 AS. The fuel is diesel. The bore measures 105 mm. The stroke is 120 mm. The compression ratio is 16:1. Maximum torque is reached at 1,430 rpm. Construction: unit construction (no separate frame). The gearbox offers 24 forward gears. There are also 8 reverse gears. The linkage is category III. Around 169 units were built. Rated output across the Renault range ranges from 16 to 250 hp; the 175-74 TZ sits in the upper part of that range with 165 hp. Its immediate neighbours are the Ares 816 RZ below it with 156 hp and the 180-94 TZ above it with 170 hp. Rated output across the Renault range ranges from 16 to 250 hp; here the 175-74 TZ sits in the upper part of that range with 165 hp. 3632 Renault models across 98 series are on record.

Renault 175-74 TZ (1989-1992): water-cooled six-cylinder standard tractor with 121.4 kW output and 593 Nm of torque from the TZ series

The 175-74 TZ was built between November 1989 and April 1992 as part of the TZ series and was among the most powerful standard tractors in Renault's programme of these years, built for large arable farms with high pulling-power requirements.

Read on 3 more paragraphs

The water-cooled six-cylinder engine displaces 6,234 cm³ and delivers 121.4 kW at 2,350 rpm, equivalent to 165 horsepower, with 593 Nm of torque. With a weight of 6,220 kg, a wheelbase of 2,760 mm and a top speed of 30 km/h, the 175-74 TZ was built for heavy drawbar work with large tillage equipment.

Six-cylinder engines of over six litres displacement and more than 160 horsepower marked the top of the standard tractor range in the late 1980s, before articulated and crawler tractors complemented this power class for the largest farms. Torque close to 600 Nm keeps full pulling power available even as engine speed drops under load.

When buying a used 175-74 TZ, the turbocharger and intercooler should be checked for loss of power, since these components are heavily stressed under full load on such a powerful six-cylinder engine. The rear axle and the large tyres also deserve a check for wear, as the tractor's high weight places lasting strain on the drivetrain components. The braking system should also be tested under full load, since such a heavy tractor must be able to stop with particular certainty.

Sources: SpecCodex-Register: Kennwerte des Modells 175-74 TZ

Technical data

Engine

Fueldieselcorrect
Power165 hp (121.4 kW)correct
Rated speed2,350 rpmcorrect
Torque593 Nmcorrect
Speed at max. torque1,430 rpmcorrect
Cylinders6correct
Displacement6,234 cm³correct
Bore105 mmcorrect
Stroke120 mmcorrect
Compression ratio16correct
Coolingwater-cooledcorrect

Dimensions and weights

Length4,863 mmcorrect
Width2,228 mmcorrect
Height3,120 mmcorrect
Wheelbase2,760 mmcorrect
Ground clearance400 mmcorrect
Unladen weight6,220 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Gearbox24 V/8 Rcorrect
Forward gears24correct
Reverse gears8correct
Front tyres16.9 R 28 AScorrect
Rear tyres20.8 R 38 AScorrect
Top speed30 km/hcorrect

Working data

Fuel tank capacity225 lcorrect

Origin and approval

Constructionunit construction (no separate frame)correct
Units built169correct

Other data

Linkage categoryCat IIIcorrect

Where this model stands

Power-to-weight ratio: 19.5 kW/t (121 kW / 6.2 t)

Power class: Large (100–180 hp)

Stronger than 87% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Renault 175-74 TZ have?

The Renault 175-74 TZ delivers 165 hp.

How much does the Renault 175-74 TZ weigh?

The unladen weight is 6,220 kg.

What engine does the Renault 175-74 TZ have?

6 cylinders, 6,234 cm³ displacement, Diesel.

How fast does the Renault 175-74 TZ go?

Top speed is 30 km/h.

What are the dimensions of the Renault 175-74 TZ?

4,863 mm × 2,228 mm × 3,120 mm.

When was the Renault 175-74 TZ built?

Production years: 11/1989–4/1992.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 30 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare