Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Renault › 110-54 TX

Renault 110-54 TX

Built: 6/1989–12/1990 · Series: TX-Baureihe

More machines from model year 1989

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The TX series from Renault includes the 110-54 TX. Production: 6/1989–12/1990. The engine delivers 100 hp (73.6 kW), has 6 cylinders, with a displacement of 6,234 cm³. Torque is 385 Nm. Rated speed is 2,350 rpm. The machine is 5,080 mm long, 2,470 mm wide and 2,980 mm high. The unladen weight is 5,040 kg. The wheelbase measures 2,740 mm. Ground clearance is 500 mm. Top speed is 30 km/h. Transmission: 16V/16R. The engine is water-cooled. Tyres: front 14.9 R 28 AS, rear 16.9 R 38 AS. The fuel is diesel. The bore measures 100 mm. The stroke is 120 mm. The compression ratio is 16:1. Maximum torque is reached at 1,400 rpm. Construction: unit construction (no separate frame). Injection pressure is 180 bar. Around 219 units were built. The TX-Baureihe series covers 24 models. Rated output within it ranges from 78 to 145 hp; the 110-54 TX sits in the lower part of that range with 100 hp. Its immediate neighbours are the 106-14 SP below it with 96 hp and the 113-12 TX above it with 103 hp. Unladen weight within it ranges from 3,100 to 6,750 kg; here the 110-54 TX sits in the middle of that range with 5,040 kg. 3632 Renault models across 98 series are on record.

Renault TX: comfort borrowed from the car division, 78 to 135 hp, four- and six-cylinder diesels, the most comfortable Renault series of its era

At the 1981 SIMA show, Renault Agriculture introduced the TX series, carrying comfort features from its in-house car development over to the tractor — an unusual approach at the time that made the TX line Renault's most comfortable series of its era.

Read on 4 more paragraphs

The register lists 24 live models, from the 103-12 TX to the 133-14 TX, built between 1981 and 1994. Output ranges from 57.4 to 106.7 kW, or 78 to 135 hp, weight from 3,100 to 6,750 kg, displacement from 4,156 to 6,234 cm3, across four- and six-cylinder engines.

In September 1982, Renault added the TS series, a reduced-specification entry version of the TX with only one door, which further underlined the TX's positioning as the comfort model.

With its broad output range of roughly 80 to 135 hp, the TX series formed the backbone of Renault Agriculture's mid-to-upper power segment for more than a decade.

When buying a used, comfort-oriented TX series, besides clutch, gearbox and hydraulic tightness, the condition of the more elaborate cab specification and suspension matters especially, being more prone to wear than the simpler TS or RS version; rust on cab and mudguards after decades of field use is common too. Parts have run through the Claas parts network since Renault Agriculture's dissolution. PTO and three-point hitch correspond in this power class to ISO 730 Category II to III, at 540 or 1,000 rpm.

Sources: SpecCodex register, model data: Renault TX-Baureihe

Technical data

Engine

Fueldieselcorrect
Power100 hp (73.6 kW)correct
Rated speed2,350 rpmcorrect
Torque385 Nmcorrect
Speed at max. torque1,400 rpmcorrect
Cylinders6correct
Displacement6,234 cm³correct
Bore100 mmcorrect
Stroke120 mmcorrect
Compression ratio16correct
Injection pressure180 barcorrect
Coolingwater-cooledcorrect

Dimensions and weights

Length5,080 mmcorrect
Width2,470 mmcorrect
Height2,980 mmcorrect
Wheelbase2,740 mmcorrect
Ground clearance500 mmcorrect
Unladen weight5,040 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Gearbox16V/16Rcorrect
Front tyres14.9 R 28 AScorrect
Rear tyres16.9 R 38 AScorrect
Top speed30 km/hcorrect

Origin and approval

Constructionunit construction (no separate frame)correct
Units built219correct

Where this model stands

Power-to-weight ratio: 14.6 kW/t (74 kW / 5 t)

Power class: Universal (40–100 hp)

Stronger than 66% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Renault 110-54 TX have?

The Renault 110-54 TX delivers 100 hp.

How much does the Renault 110-54 TX weigh?

The unladen weight is 5,040 kg.

What engine does the Renault 110-54 TX have?

6 cylinders, 6,234 cm³ displacement, Diesel.

How fast does the Renault 110-54 TX go?

Top speed is 30 km/h.

What are the dimensions of the Renault 110-54 TX?

5,080 mm × 2,470 mm × 2,980 mm.

When was the Renault 110-54 TX built?

Production years: 6/1989–12/1990.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 26 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare