Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Renault › 130 CDI MASTER

Renault 130 CDI MASTER

Built: 2004-2004 · Series: Trucks 3.5–12 t (Class N2)

More machines from model year 2004

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Renault 130 CDI MASTER belongs to the Trucks 3.5–12 t (Class N2) series. Production: 2004. The engine delivers 92 kW, with a displacement of 2,800 cm³. The machine is 7,200 mm long and 2,090 mm wide. The unladen weight is 2,800 kg. The gross vehicle weight is 3,800 kg. The Trucks 3.5–12 t (Class N2) series covers 142 models. Rated output within it ranges from 68 to 180 kW; the 130 CDI MASTER sits in the lower part of that range with 92 kW. Its immediate neighbours are the THEAULT 120 MORPHEO/407 below it with 88 kW and the S 130-11-JP1A12/400 above it with 98 kW. Unladen weight within it ranges from 2,519 to 8,375 kg; here the 130 CDI MASTER sits at the bottom of that range with 2,800 kg. 3632 Renault models across 98 series are on record.

Renault trucks 3.5 to 12 t (class N2) – collective page from the Master and Mascott van chassis to the Midliner distribution truck: engines from 68 to 180 kW, displacements up to 11,000 cm³, gross weights up to 12 t

The EU vehicle class N2 covers trucks from 3.5 to 12 t gross vehicle weight; this page is a collective page built from registration data (Netherlands, Finland) bundling every Renault range recorded in that class. The lower end is formed by chassis-cab versions of the Master van and the higher-positioned Mascott, which in heavier configurations exceed the 3.5-tonne threshold; the upper end is the Midliner, a medium-duty distribution truck built from the 1980s until it was replaced by the Midlum around the turn of the millennium. Renault Trucks, trading as Renault Véhicules Industriels until 2002 and heir to the Berliet and Saviem brands, has belonged to the Volvo Group since 2001.

Read on 3 more paragraphs

The register lists 142 versions with kerb weights of 1,890 to 9,200 kg and gross vehicle weights of 3,510 to 12,000 kg. Engine outputs are recorded for 36 models and range from 68 to 180 kW, displacements from 1,500 to 11,000 cm³ across 4 to 6 cylinders; length runs from 4,860 to 11,350 mm, width from 2,000 to 2,600 mm.

The span shows how fluid the line between light van and medium truck is at Renault: the Master and Mascott, as panel vans and chassis-cabs, address urban distribution traffic, while the Midliner, with a flatbed, box body or tipper, competed in classic regional freight transport against the MAN L/M range, Iveco Eurocargo and Mercedes-Benz Atego.

On a used example, what matters on the van derivatives is frame corrosion at the tow hitch and the condition of the rear axle, on the Midliner the clutch, brakes and condition of the load body; on the older models, listed in the register only under short codes, it is worth checking the chassis number, as type plates are often missing. Spare parts for the Master and Mascott are readily available through the Renault network, for older Midliner stock more limited.

Sources: SpecCodex register, model data: Renault Lkw 3,5–12 t (Klasse N2), Renault Trucks

Technical data

Engine

Power92 kWcorrect
Displacement2,800 cm³correct

Dimensions and weights

Length7,200 mmcorrect
Width2,090 mmcorrect
Unladen weight2,800 kgcorrect
Gross vehicle weight3,800 kgcorrect

Where this model stands

Power-to-weight ratio: 32.9 kW/t (92 kW / 2.8 t)

Stronger than 5% of the trucks in the register — out of 25,242 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Renault 130 CDI MASTER have?

The Renault 130 CDI MASTER delivers 92 kW.

How much does the Renault 130 CDI MASTER weigh?

The unladen weight is 2,800 kg.

What is the gross vehicle weight of the Renault 130 CDI MASTER?

3,800 kg.

What engine does the Renault 130 CDI MASTER have?

2,800 cm³ displacement.

What are the dimensions of the Renault 130 CDI MASTER?

7,200 mm × 2,090 mm.

When was the Renault 130 CDI MASTER built?

Production years: 2004.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare