StartTrucks over 7.5 tZil › ГАЗ-56

Zil ГАЗ-56

Built: 1958-1962 · Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Зил ГАЗ-56 is a machine built by Зил. Production: 1958-1962. The machine is 5,085 mm long, 2,172 mm wide and 1,995 mm high. The unladen weight is 2,050 kg. The wheelbase measures 3,000 mm. Unladen weight across the Зил range ranges from 32.3 to 199,170 kg; the ГАЗ-56 sits at the bottom of that range with 2,050 kg. Its immediate neighbours are the МКГ-25 below it with 2,020 kg and the ГАЗ-44 above it with 2,230 kg. 161 Зил models across 8 series are on record. The model is listed under Trucks over 7.5 t. 6 verified figures from 1 source are on file.

Technical data

Engine

EngineГАЗ-56correct

Dimensions and weights

Length5,085correct
Width2,172correct
Height1,995correct
Wheelbase3,000correct
Unladen weight2,050correct

Frequently asked questions

How much does the Zil ГАЗ-56 weigh?

The unladen weight is 2,050 kg.

What are the dimensions of the Zil ГАЗ-56?

5,085 mm × 2,172 mm × 1,995 mm.

When was the Zil ГАЗ-56 built?

Production years: 1958-1962.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare