StartFire, rescue & special vehiclesZil › АЦ-2,5-40

Zil АЦ-2,5-40

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Зил АЦ-2,5-40 is a machine built by Зил. The machine is 7,186 mm long, 2,420 mm wide and 2,760 mm high. The unladen weight is 11,000 kg. Unladen weight across the Зил range ranges from 32.3 to 199,170 kg; the АЦ-2,5-40 sits at the bottom of that range with 11,000 kg. Its immediate neighbours are the КАМАЗ-6350 below it with 10,750 kg and the ТЛТ-100А above it with 11,200 kg. 161 Зил models across 8 series are on record. The model is listed under Fire, rescue & special vehicles. 5 verified figures from 1 source are on file.

Technical data

Engine

EngineМинский моторный завод Д-245.30 Е3correct

Dimensions and weights

Length7,186correct
Width2,420correct
Height2,760correct
Unladen weight11,000correct

Frequently asked questions

How much does the Zil АЦ-2,5-40 weigh?

The unladen weight is 11,000 kg.

What are the dimensions of the Zil АЦ-2,5-40?

7,186 mm × 2,420 mm × 2,760 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Fire appliance in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare