StartFire, rescue & special vehiclesZil › КАМАЗ-65117

Zil КАМАЗ-65117

Built: 2004-2004 · Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The КАМАЗ-65117 comes from Зил. Production: 2004. The machine is 9,950 mm long, 2,550 mm wide and 2,990 mm high. The unladen weight is 24,000 kg. Unladen weight across the Зил range ranges from 32.3 to 199,170 kg; the КАМАЗ-65117 sits at the bottom of that range with 24,000 kg. Its immediate neighbours are the МАЗ-7310 below it with 23,000 kg and the МАЗ-525 above it with 24,380 kg. 161 Зил models across 8 series are on record. The model is listed under Fire, rescue & special vehicles. 5 verified figures from 1 source are on file.

Technical data

Engine

EngineКАМАЗ-740.30-260correct

Dimensions and weights

Length9,950correct
Width2,550correct
Height2,990correct
Unladen weight24,000correct

Frequently asked questions

How much does the Zil КАМАЗ-65117 weigh?

The unladen weight is 24,000 kg.

What are the dimensions of the Zil КАМАЗ-65117?

9,950 mm × 2,550 mm × 2,990 mm.

When was the Zil КАМАЗ-65117 built?

Production years: 2004.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Fire appliance in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare