StartFire, rescue & special vehiclesZil › КАМАЗ-4310

Zil КАМАЗ-4310

Built: 1981-2001 · Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The КАМАЗ-4310 comes from Зил. Production: 1981-2001. The machine is 7,435 mm long, 2,500 mm wide and 2,630 mm high. The unladen weight is 7,080 kg. Unladen weight across the Зил range ranges from 32.3 to 199,170 kg; the КАМАЗ-4310 sits at the bottom of that range with 7,080 kg. Its immediate neighbours are the ЗИЛ-133 below it with 6,875 kg and the Урал-377 above it with 7,275 kg. 161 Зил models across 8 series are on record. The model is listed under Fire, rescue & special vehicles. 5 verified figures from 1 source are on file.

Technical data

Engine

EngineКАМАЗ-740.10, КАМАЗ-740.20correct

Dimensions and weights

Length7,435correct
Width2,500correct
Height2,630correct
Unladen weight7,080correct

Frequently asked questions

How much does the Zil КАМАЗ-4310 weigh?

The unladen weight is 7,080 kg.

What are the dimensions of the Zil КАМАЗ-4310?

7,435 mm × 2,500 mm × 2,630 mm.

When was the Zil КАМАЗ-4310 built?

Production years: 1981-2001.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Fire appliance in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare