Pilob MTP 3,5
Built: 2020 · Series: Other models
More machines from model year 2020
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Pilob – other models: the collective page of trailers outside the named ranges, MTP 3.5 and MTP 3.5 A3 with the gross weight in the type name, 430 to 730 kg unladen weight, 2,000 to 3,500 kg gross weight
This page gathers the Pilob trailers the register could not assign to a named range. The types MTP 3.5 and MTP 3.5 A3 recognisably carry the gross weight in tonnes in the name, with A3 as an additional designation suffix. As with many smaller trailer brands, the programme is drawn from registration data, in which each model is listed individually with its technical values.
Read on 3 more paragraphs
The register lists here 3 versions with unladen weights from 430 to 730 kg, gross weights from 2,000 to 3,500 kg, lengths from 8,400 to 8,500 mm and widths from 2,220 to 2,500 mm.
With gross weights of 2 to 3.5 tonnes, lengths of over eight metres and a comparatively low unladen weight, the emphasis lies on a long but light load rather than high payload; the ratio of length to weight clearly sets these versions apart from compact trailers of the same weight class. For registration behind a car, besides the trailer's gross weight the tow vehicle's rated towing capacity is also decisive, since it sets the real limit for the load towed.
On a used example of such a long, light trailer, the condition and flex of the frame, axles and overrun brake, rust on drawbar and side rails, and tyres and rims all count in particular. Parts for such small brands usually run through independent trailer workshops rather than a maker's own network. On versions with an overrun brake, the adjustment of the brake linkage and the condition of the brake linings are also worth checking before the first drive.
Sources: SpecCodex register, model data: Pilob (weitere Modelle)
Technical data
Dimensions and weights
| Length | 8,400 mmcorrect |
|---|---|
| Width | 2,400 mmcorrect |
| Wheelbase | 5,950 mmcorrect |
| Unladen weight | 670 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Pilob MTP 3,5 weigh?
The unladen weight is 670 kg.
What is the gross vehicle weight of the Pilob MTP 3,5?
3,500 kg.
Up to what speed is the Pilob MTP 3,5 approved?
Approved up to 100 km/h.
What are the dimensions of the Pilob MTP 3,5?
8,400 mm × 2,400 mm.
When was the Pilob MTP 3,5 built?
Production years: 2020.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.