Pekazett UFF 360
Built: 1970–1976 · Series: UFF
More machines from model year 1970
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Pekazett UFF – range from the Zweibrücken manufacturer: UFF 260 and UFF 360, 42.5 kW / 58 hp, four-cylinder of 3,400 cm³, unladen weight 4,200 to 4,900 kg
Pekazett was a German manufacturer based in Zweibrücken in the Palatinate; the UFF range comprises the two diesel tractors UFF 260 and UFF 360. Little is documented about the exact production period and numbers built of the UFF range, but the surviving figures point to an unusually heavy vehicle concept for its power class.
Read on 3 more paragraphs
The register lists here 2 versions with 42.5 kW, or 58 hp, from a four-cylinder engine of 3,400 cm³, an unladen weight of 4,200 to 4,900 kg, a length of 4,550 mm, a width of 2,200 mm, a height of 2,550 mm and a rated speed of 2,300 rpm.
With an unladen weight of over four tonnes against comparatively moderate power, the UFF range stood for a robust, heavy vehicle build, as sought for demanding field and transport work in the Palatinate and neighbouring regions. Heavy diesel tractors of this kind from small West German makers competed in the 1950s and 1960s with the established large brands for regional customers, especially on farms with demanding terrain.
Buyers of used units should check the injection pump and fuel system, clutch and gearbox, and given the weight especially the brakes and frame for wear and rust; as the manufacturer no longer exists, spares can only be obtained through collectors and specialist restorers. Checking the cooling system, steering and the often heavily worked rear axle also matters; given how rare such a vehicle is, consulting Palatinate tractor-collector circles before purchase is worthwhile.
Sources: SpecCodex register, model data: Pekazett UFF
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 58 hp (42.5 kW)correct |
| Rated speed | 2,300 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 3,400 cm³correct |
| Bore | 95 mmcorrect |
| Stroke | 120 mmcorrect |
| Injection pressure | 175 barcorrect |
| Cooling | air-cooledcorrect |
Dimensions and weights
| Length | 4,550 mmcorrect |
|---|---|
| Width | 2,200 mmcorrect |
| Height | 2,550 mmcorrect |
| Wheelbase | 3,120 mmcorrect |
| Ground clearance | 620 mmcorrect |
| Unladen weight | 4,900 kgcorrect |
Drivetrain and chassis
| Drive | Hinterachsecorrect |
|---|---|
| Gearbox | 9V/3Rcorrect |
| Front tyres | 11-28 AScorrect |
| Rear tyres | 15.5-38 AScorrect |
| Top speed | 20 km/hcorrect |
Origin and approval
| Construction | frameless unit constructioncorrect |
|---|---|
| Units built | 7correct |
Where this model stands
Power-to-weight ratio: 8.7 kW/t (42 kW / 4.9 t)
Power class: Universal (40–100 hp)
Stronger than 40% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Pekazett UFF 360 have?
The Pekazett UFF 360 delivers 58 hp.
How much does the Pekazett UFF 360 weigh?
The unladen weight is 4,900 kg.
What engine does the Pekazett UFF 360 have?
4 cylinders, 3,400 cm³ displacement, Diesel.
How fast does the Pekazett UFF 360 go?
Top speed is 20 km/h.
What are the dimensions of the Pekazett UFF 360?
4,550 mm × 2,200 mm × 2,550 mm.
When was the Pekazett UFF 360 built?
Production years: 1970–1976.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 23 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.