Parator ST 18-20
Built: 2010 · Series: Other models
More machines from model year 2010
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Parator – other models: heavy-haul and low-loader trailers outside the named ranges, unladen weights from 2,400 to 10,940 kg, gross weights up to 51,000 kg, widths up to 2,970 mm
This page gathers the Parator trailers the register could not assign to a named range – uniformly heavy versions for special and heavy-haul transport. Type designations such as SVX, SSV, SCV and Vx combine letters for the build type with two number blocks giving axle spacing and size, for example Vx 15-20 or SSV 18-18.
Read on 3 more paragraphs
The register lists here 42 versions with unladen weights from 2,400 to 10,940 kg, gross weights from 16,000 to 51,000 kg, lengths from 4,900 to 15,734 mm and widths from 2,440 to 2,970 mm.
With widths of nearly 3 metres and gross weights up to 51 tonnes, the vehicles exceed the usual standard semi-trailer dimensions and sit in the range of special and heavy-haul transport, for instance for construction machinery, precast concrete parts or wind-turbine components; such low-loader trailers are used in European heavy transport alongside standard semi-trailers and are mostly operated under special permit.
When buying used, low-loaders call for checking the condition and tightness of the hydraulics for extendable or lowerable load platforms, the condition of the chassis and main beams under high point loads, axles, steering axles and braking system, and rust on loading ramps and the deck; parts for axles and hydraulics run through the usual commercial-vehicle suppliers such as BPW, SAF and Hyva.
Sources: SpecCodex register, model data: Parator (weitere Modelle)
Technical data
Dimensions and weights
| Length | 13,660 mmcorrect |
|---|---|
| Width | 2,600 mmcorrect |
| Unladen weight | 9,640 kgcorrect |
| Gross vehicle weight | 38,000 kgcorrect |
Frequently asked questions
How much does the Parator ST 18-20 weigh?
The unladen weight is 9,640 kg.
What is the gross vehicle weight of the Parator ST 18-20?
38,000 kg.
What are the dimensions of the Parator ST 18-20?
13,660 mm × 2,600 mm.
When was the Parator ST 18-20 built?
Production years: 2010.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
CV 18-20
P P2-26-118
PARATOR
PARATOR S16
PARATOR SCV 18-20
PARATOR SSV 18-18
PARATOR SVX 15-20
PARATOR Slxt 10-20
PARATOR VX 15-20
PS326-111
Parator S 16
Parator Slx 24
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.