Pacton LXD 119
Built: 1998-1999 · Series: LXD
More machines from model year 1998
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Pacton LXD – semi-trailer range from the Dutch manufacturer: 9 versions, unladen weight from 6,200 to 11,080 kg, gross weight from 19,000 to 42,000 kg, lengths up to 14,000 mm
Pacton is a Dutch semi-trailer manufacturer based in Werkendam, known for tipper, curtainside and container semi-trailers for European freight transport. The LXD range brings together a group of versions in the register, whose type designation consists of the LXD prefix and a three- to four-digit number.
Read on 3 more paragraphs
The register lists here 9 versions with unladen weights from 6,200 to 11,080 kg and a gross weight from 19,000 to 42,000 kg. Lengths range from 13,700 to 14,000 mm, and widths from 2,550 to 2,600 mm.
The consistent length of around 13.7 to 14 metres matches the European standard size for semi-trailers, while the wide spread of gross weight from 19 to 42 tonnes points to different axle counts and load concepts within the range. Semi-trailers of this type, swapped between hauliers and tractor units, are a core element of European road freight transport.
When buying a used Pacton semi-trailer of this range, the frame and axle suspension (corrosion, cracks, wear of the air suspension), the condition of the braking system, and, depending on the body, the tarpaulin, side boards or locking mechanisms all matter. Spare parts for axles, brakes and lighting are available through the general semi-trailer parts trade and from Pacton directly. It is also worth checking the complete service history and the validity of inspections and technical tests.
Sources: SpecCodex register, model data: Pacton LXD, Pacton (manufacturer)
Technical data
Dimensions and weights
| Width | 2,550 mmcorrect |
|---|---|
| Wheelbase | 820 mmcorrect |
| Unladen weight | 6,200 kgcorrect |
| Gross vehicle weight | 19,000 kgcorrect |
Drivetrain and chassis
| Wheels | 2correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Pacton LXD 119 weigh?
The unladen weight is 6,200 kg.
What is the gross vehicle weight of the Pacton LXD 119?
19,000 kg.
Up to what speed is the Pacton LXD 119 approved?
Approved up to 100 km/h.
When was the Pacton LXD 119 built?
Production years: 1998-1999.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.