Oosterwijk JOS 2 – specifications
Built: 1995-2014 · Series: JOS
Data for the version built 1995-2014 · Data origin: Official register · sources
More machines from model year 1995
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Oosterwijk JOS – trailer range from the Dutch manufacturer: 3,500 to 7,000 kg gross weight, 930 to 3,320 kg unladen weight, 7.8 to 9.0 m length
This page gathers the JOS range from the Dutch trailer manufacturer Oosterwijk. In the models JOS 3500, JOS 3500-2, JOS 3500-2L and JOS 3500-3, the number 3500 matches the gross weight of 3,500 kg, while JOS 7200 matches a gross weight of around 7,000 kg; -2, -2L and -3 mark axle and ramp variants.
Read on 4 more paragraphs
The register lists here 8 versions with unladen weights from 930 to 3,320 kg, gross weights from 3,500 to 7,000 kg, lengths from 7,800 to 8,980 mm and widths from 1,900 to 2,550 mm.
Spanning 3.5 to 7 tonnes, the JOS range sits between the classic car trailer and the light semi-trailer and is used to transport machinery, vehicles and building materials behind vans and light lorries, where the open platform with ramps eases loading of wheeled and tracked machines.
Up to a gross weight of 3.5 tonnes in class O2, the overrun brake with a ball coupling suffices; above that limit, class O3 requires an air brake system, and the necessary licence correspondingly shifts from B or BE to C1E. On the heavier versions with a fifth-wheel coupling, a kingpin is used instead of a towing eye, as is typical for platform trailers with a saddling option.
On a used trailer, the condition of the load floor and ramps, corrosion of the frame and axle carrier, the overrun brake or, on the heavier versions, the service brake, the tyres, and the condition of the coupling eye or kingpin all count; parts run through the Dutch trailer trade.
Sources: SpecCodex register, model data: Oosterwijk JOS
Technical data
Dimensions and weights
| Width | 2,500 mmcorrect |
|---|---|
| Coupling-to-axle distance | 887 mmcorrect |
| Unladen weight | 3,320 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Oosterwijk JOS 2 weigh?
The unladen weight is 3,320 kg.
What is the gross vehicle weight of the Oosterwijk JOS 2?
3,500 kg.
Up to what speed is the Oosterwijk JOS 2 approved?
Approved up to 100 km/h.
When was the Oosterwijk JOS 2 built?
Production years: 1995-2014.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
